Part Location Diagram of 10024242030 Shindaiwa Crankcase Gasket
See part H-16 in the diagram
Replacing your Echo Trimmer Crankcase Gasket
( Grid squares measure 1x1 inch )

Crankcase Gasket 10024242030

Manufactured by:
Shindaiwa
ERP Number:
ERP9254960
Part Number:
10024242030
Original Equipment Manufacturer ?
  Works with your model  ES-210!
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(3 rated repairs) ?
  Works with your model   ES-210!

Product Description

?

This is an authentic replacement part manufactured for use with outdoor power equipment. The crankcase gasket is used to seal the two halves of the crankcase. It is recommended to replace gaskets when servicing the engine to ensure proper seals when reassembling the engine. This crankcase gasket is available as an individual replacement part.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Echo
  • Shindaiwa
  • Little Wonder
This part works with the following products:
  • Trimmer
  • Hedge Trimmer
  • Pole Saw
  • Leaf Blower / Vacuum
  • Edger
  • Engine
  • Chipper Shredder
  • Brush Cutter
  • Tiller
  • Water Pump
Part# 10024242030 replaces these:
10024242030,

Videos For installing this part.

?
Replacing your Crankcase Gasket

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

leaking oil

Rex from Kingsville, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
Parts Used:
10024242030, V100000160
1 removed piston head
2 separated crankshaft housing
3 replaced both oil seals
4 re assembled unit with new gaskets. and new piston ring
5 finished assembly of unit
6 started second pull.
Did you find this story helpful?
Thank you for voting!

Crank seal leaking

Mark from Weatherford, Oklahoma

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Replaced crank seals, cylinder gasket and crankcase gaskets
Did you find this story helpful?
Thank you for voting!

Echo SRM trimmer wouldnt start

stephen from STRATHAM, New Hampshire

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
I recently completed a small engine repair course. My trimmer wouldn\'t start but had good spark and compression. It\'d start briefly using starter fluid but wouldn\'t star running. Using my new knowledge I took my non running Echo SRM-210 completely apart, separated the block and replaced all of the seals and gaskets on the trimmer. I al so cleaned the unit completely and put new fuel lines and grommet and a new carb. Total time from start to finish was just about 2 hours. For less than $100 worth of parts I have a trimmer that runs as new, vs replacing it with a $200-250 new unit. I\'m pretty handy but before the OPE course I wouldn\'t have even attempted this repair, now I have full confidence and cant wait for the next project.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9254960
Manufacturer Part Number: 10024242030
Brand Model Number Description
Little Wonder 7222 Tiller - 7222 2-Cycle Gas Tiller (January 2001 Through March 2004)
Little Wonder 7225 Tiller - 7225 2-Cycle Gas Tiller (March 2005 To Date)
Little Wonder 7230 Tiller - 7230 Faststart Tiller (March 2003 Through March 2005)
Little Wonder 9555 Leaf Blower / Vacuum - Mantis Blower/Shredder Vacuum
Shindaiwa DH212 Hedge Trimmer - Hedge Trimmer
Shindaiwa EB212 Leaf Blower / Vacuum - Power Blower
Echo ED-200 Engine - Engine Drill
Echo EDR-210 Engine - Engine Drill
Echo ES-210 Chipper Shredder - Shred &#39N&#39 Vac
Echo ES-211 Chipper Shredder - Shred &#39N&#39 Vac
Echo ES-250 Chipper Shredder - 25.4 cc Shred 'N' Vac
Echo ES-252 Chipper Shredder - Echo Shred N Vac Shredder/Vacuum
Echo ES-255 Chipper Shredder - Shred &#39N&#39 Vac
Shindaiwa FH235 Hedge Trimmer - Hedge Trimmers (Fh)
Echo GT-1100 Trimmer - Curved Shaft Grass Trimmer
Echo GT-200 Trimmer - Curved Shaft Grass Trimmer
Echo GT-2000EZR Trimmer - Curved Shaft Grass Trimmer
Echo GT-2000R Trimmer - Curved Shaft Grass Trimmer
Echo GT-200EZR Trimmer - Curved Shaft Grass Trimmer
Echo GT-200I Trimmer - Curved Shaft Grass Trimmer
Echo GT-200R Trimmer - Curved Shaft Grass Trimmer
Echo GT-201 Trimmer - Curved Shaft Grass Trimmer
Echo GT-201EZR Trimmer - Curved Shaft Grass Trimmer
Echo GT-201I Trimmer - Curved Shaft Grass Trimmer
Echo GT-201R Trimmer - Curved Shaft Grass Trimmer
Echo GT-2100 Trimmer - Curved Shaft Grass Trimmer
Echo GT-2103 Trimmer - Curved Shaft Grass Trimmer
Echo GT-225 Trimmer - 21.2 cc Curved Shaft Trimmer
Echo GT-225I Trimmer - 21.2 cc Curved Shaft Trimmer
Echo GT-225L Trimmer - Trimmer