The V471001190 Fuel Pipe is connected to the fuel filter inside the fuel tank. It is inserted through the fuel line grommet and then connected to the carburetor so that when the primmer is pushed, it will force fuel into the carburetor. Fuel lines will at some time become brittle and crack and will have to be replaced.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
A few small parts
I got a few small parts to repair a fuel leak problem, everything fit perfectly. The site was easy to navigate, parts weren't expensive and shipped quickly. Mission accomplished
Guest - June 14, 2019
Verified Purchase
★★★★★
★★★★★
The right parts... No troubles
Received parts for an echo weed eater. Parts were easy to find and order on website. Good Job!
Guest - June 11, 2019
Verified Purchase
★★★★★
★★★★★
15 year old echo running again!
My Echo trimmer finally gave in to 'ethanol'. Prime bulb cracked. I ordered all the fuel line and fuel 'plastic parts' from 'ereplacementparts'. Fast service. Replaced parts, Echo running again! I might get another 15 years out of it, and not have to deal with 'li-on' battery operated junk from China.
Guest - June 24, 2019
Verified Purchase
★★★★★
★★★★★
ECHO WEED EATER
All of the parts I ordered for perfect. My husband had looked for parts at all of the places around our are and was unable to find any parts at all for our ECHO. Everyone told us they didn't think parts for this older equipment was available. But, I continued to search the internet until I found your company. Replaced all the parts and we were thrilled worked just like when Echo was new. I have been telling g everyone about you guys. Thank you for being so helpful when ordering.
Guest - July 1, 2019
Verified Purchase
★★★★★
★★★★★
fit great
easy repair!
Guest - July 1, 2019
Verified Purchase
★★★★★
★★★★★
Fixed fuel leak in my Echo weed eater.
Easy installation. No fuel leaks. Works good. Shipped and received in timely manner. I recommend e replacements for all your parts repair needs. Thanks to e replacements.
Guest - April 4, 2024
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(62 rated repairs)?
< Prev
1
2
3
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
This maintenance was pretty straight forward. Replacing air filter and spark plug was easy. Instructions come with spark plug gap number so that you can adjust the gap yourself. Replaced fuel vent, filter and primer tubes which are easy removed and replaced. Replaced fuel filter, as it\'s attached to the end of a tube inside of fuel tank.
... Read more You use a 4\" wire and form a hook on the end of it in order to pull out the tube from inside the fuel tank. It has the fuel filter attached to it. Simple replace. I replaced the rubber primer bulb. It\'s attached by 4 screws to carburetor and easy to access. Just remove the screws and plate, then remove old bulb and replace with new primer bulb and reattach screws. This all took about 30 minutes. Very easy. You just need screwdriver, spark plug socket and wire cutters to cut a piece of wire with. Use a coat hanger wire or any flexible wire that you can stick inside the fuel tank.
Read less
Did you find this story helpful?
Thank you for voting!
Fuel filter tube broken off in fuel tank , dirty air and fuel filters, cracked primer bulb
Replace primer bulb by removing metal plate screws and replacing old bulb. Remove and replace old air filter in same manner. Remove grommet containing fuel lines from opening in fuel tank. Attach new fuel filter to new fuel line and push through opening in new grommet from underside. Install new grommet in tank opening and then push r
... Read moreemaining tubes in proper holes. It is important to wait to install the remaining tubes after the new grommet is in place in order to have enough flexibility to squeeze the grommet to fit the opening in the tank.
Started by emptying the fuel, then took off the cover, and removed the tank. Ran the new lines into the tank, and connected them to the carb, then reassembled everything.
Removed fuel tank/removed old gourmet & fuel lines from tank /pulled fuel lines & etc loose from carburetor. Thread new lines through gourmet/installed new gas filter before installing gourmet & other lines into fuel tank. Used lite coat of oil on lines to get them through gourmet easier. The gas filter will fit through hole the gourmet c
... Read moreomes out of. When finished there was no more gas leaks & Echo weed eater runs like a new one . I did install a new spark plug which I already had,gap is .026.
Echo SRM 210 trimmer. Found fuel contaminated. Remove fuel tank, carb and fuel lines. Cleaned the tank, cleaned and rebuilt the carb using Ereplacement kit. Replace the fuel and return lines and fuel filter. Fresh fuel and one pull and it was running!!!! Using the posted ereplacements videos makes the repair easy! You may find less expens
... Read moreive parts on the net but not the quality of the Ereplacement parts!!!
Read less
Did you find this story helpful?
Thank you for voting!
Gasoline leaking from grommet in fuel tank. Old tubes also well worn. Time to replace air filter and spark plug too.
1. Removed \"foot\" from the base of the motor.
2. Removed pull starter.
3. Removed fuel tank, all tubes, and grommet.
4. Replaced grommet, tubes, and filters.
5. Also replaced air filter and spark plug.
No more leaks and unit runs well!
Did you find this story helpful?
Thank you for voting!
Leaking gas from fuel tank. Tank grommet was especially worn from exposure to gas.
Removed the air filter to make getting at fuel tank grommet with ease. Pulled all hoses out from the grommet. Used needle nose pliers to get the grommet out. Greased all hoses and the grommet to make ease of replacement. The wire was used to pull the gas line out and the sculpting tool to press in the grommet.
Removed fuel from gas tank, removed fuel tank grommet and fuel lines. Installed new fuel lines in grommet; use a little lube on new lines going thru grommet, then put new grommet in fuel tank and attach fuel lines to carburetor.
Removed the gas tank and fuel lines from machine.
Installed all new parts on new gas tank, then mounted assembly to the edger , connected lines to carb.
FYI; Dish detergent helps when installing new fuel lines thru the rubber grommet, and getting the grommet installed in the gas tank
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP17016309
Manufacturer Part Number: V471001191
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/lawn-and-garden/trimmer/hoses-and-tubes/"},{"position":2,"name":"V471001191","title":"V471001191","url":""}]
_(290323__Up)_WW_7.gif "Part Location Diagram of V471001191 Echo Fuel Line")
_(290323__Up)_WW_7.gif "Part Location Diagram of V471001191 Echo Fuel Line")
