This is a genuine OEM sourced replacement carburetor. It is specially designed for use with Echo and Shindaiwa trimmer/brush cutters. Carburetor plays a key role in gas-powered equipment.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Better then New
We took our echo trimmer to repair shop, He said “can’t fix junk it “ Got a second Opinion he told us about ereplacementparts.com .. Ordered by phone , Very helpful , got the right part .. the repair man put it on less then 10 min.. RUN FANTASTIC
Thank You for Fast Friendly Services
Guest - August 17, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair and worked great!
Replaced the newly replaced cheap carburetor with this oem replacement one and the edger worked and ran great! Very happy with this purchase.
Guest - September 17, 2019
Verified Purchase
★★★★★
★★★★★
Easy fix
The part worked excellant, a little pricey as opposed to other sites, but it works.
Dale - October 1, 2019
Verified Purchase
★★★★★
★★★★★
worked perfect. arrived quick.
Worked Great. hedger started first try after first pull.
Guest - May 16, 2020
Verified Purchase
★★★★★
★★★★★
Replacement Carburetor
Works like new now don’t buy anything else buy here Good People
Guest - March 29, 2021
Verified Purchase
★★★★★
★★★★★
Carb purchase
Save yourself the trouble and buy the new carb first. For 70$ you can’t go wrong. I tried the money saving route with rebuild kit. The time I spent taking carb apart and soaking in cleaner then re building it to discover that the jets must have still had some obstruction. I ordered the mew carb and in 10 minutes had the weed-eater running like a champ. I love the fact that I can order parts for my serial number. That makes you guys awesome.
Joel - April 15, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed original carb from trimmer intake being carful not to damage the gasket between carb & intake because there is not on supplied with new carb. Affixed new carb with the original unint gasket snugged all machine screws reattached supply & return fuel lines primed bulb checked for leaks in two pulls of chord I was back in business. I
... Read more did have to adjust the idle so trimmers would stay running @ idle.
Read less
Did you find this story helpful?
Thank you for voting!
String Trimmer would start and then die. Would not stay running
1. Removed air cleaner cover and filter and removed the three fuel lines
2. Using slotted screwdriver removed two screws holding air filter base and carburetor from engine and removed carburetor.
3. Disconnected throttle cable from carburetor
4. Removed old carburetor gasket from engine
5. Put new gasket on engi
... Read morene
6. Attached throttle cable
7. Set new carburetor in place and set carburetor in place
8. Attached carburetor and filter base to engine using two screws previously removed
9. Reattached fuel lines
10. Replaced air filter and cover.
11. Started engine by pushing priming bulb several times and pulling starter cord approximately 6 times.
Engine now runs great.
Read less
Did you find this story helpful?
Thank you for voting!
Couldn\'t stop fuel from leaking out of the intake orifice causing the air filter to soak up the fuel.
1. Removed air filter & cover.
2. Removed carburetor, (2-screws, Phillips head).
3. Disconnected fuel control cable.
4. Disconnected fuel lines one at a time insuring the port I removed one from I installed onto the same one on the new carburetor.
5. Using the two screws removed in item#2 above, re-installed t
... Read morehe new carburetor.
6. Installed the fuel control cable.
7. Primed the plastic primer bulb.
8. Started engine on second pull.
Read less
Did you find this story helpful?
Thank you for voting!
Could not start the hedge trimmer. Gas tank was cracked
1. Removed gas lines from carburetor.
2. Removed gas tank by removing two screws holding it place,
3. Removed carburetor air filter.
4. Removed carburetor by removing two screws holding it to the engine.
5. Replaced gasket between carburetor and engine mounting block
6. Installed new carburetor.
7. Ins
... Read moretalled carburetor air filter
8. Installed new fuel and vent lines in new gas tank
9. Installed new gas tank on hedger and attached new gas lines to carburetor.
10. Added fuel to gas tank.
11. Required about eight pulls before engine started. Runs great
Read less
Did you find this story helpful?
Thank you for voting!
Trimmer would only run with almost full choke, carburetor needed rebuilding
I put my Echo hedge trimmer in my bench vice ,removed the air filter removed two screws holding the carburetor to the engine unhook throttle cable installed new carburetor in reverse. New carburetor was an exact match the only tool needed was a screwdriver the repair took ten minutes could not have been easier and I also replaced the spar
... Read morek plug .
Removed the air filter
Removed the fuel lines and throttle
Removed the two screws and the old carburetor
Installed the new carburetor on the screws
Replace the fuel lines and throttle and the air filter
1. Drained fuel from tank
2. Disconnected throttle cable and fuel lines from carburetor
3. Removed carburetor
4. Removed fuel tank and cleaned w/carburetor cleaner
5. Replaced in-tank pickup
6. Installed carburetor
6. Installed new air filter case
7. Added fuel and started trimmer
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_9.gif "Part Location Diagram of A021000742 Echo Trimmer Carburetor")
_WW_9.gif "Part Location Diagram of A021000742 Echo Trimmer Carburetor")
