This OEM fuel tank assembly is made out of Plastic and it includes the fuel lines, fuel cap, and fuel filter. It is a common part in gas trimmers that is used to hold the fuel needed for the engine. It is very important to replace the fuel tank if it is cracked or damaged to avoid further damage or serious injuries. Make sure to drain the gas tank before starting a repair.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Simple Screwdriver Repair
Direct fit replacement, works perfectly. Two screws out and back in, hooked up the lines. Swapped gas out of the old tank, primed the engine and was back to work on the yard. Thanks!
Guest - May 2, 2019
Verified Purchase
★★★★★
★★★★★
Great Transaction
Exactly as described, fit perfect, quick delivery.
Guest - May 13, 2019
Verified Purchase
★★★★★
★★★★★
Outstanding
Part was a perfect fit and exactly like the original
Guest - May 17, 2019
Verified Purchase
★★★★★
★★★★★
Easy shopping for right part.
Site was easy to navigate to find correct part. Shipped quickly. Right part that installed easily. Would order from again.
Guest - May 17, 2019
Verified Purchase
★★★★★
★★★★★
Easy part change out
Came with extra screws. Easy replacement. Back up and running.
Guest - May 20, 2019
Verified Purchase
★★★★★
★★★★★
Works fine
Clean product I’m really surprised it fit
Guest - June 3, 2019
Verified Purchase
★★★★★
★★★★★
Easy to instal, works as expected.
The part arrived quickly, easy install, now the weed Wacker runs again.
eReplacement is my go to site to buy parts.
Marc - June 4, 2019
Verified Purchase
★★★★★
★★★★★
Exactly what I needed.
The picture on your web site was very helpful. The cost of this gas tank was less than the cost of the brand name recommended gas tank. Thanks again.
Guest - June 14, 2019
Verified Purchase
★★★★★
★★★★★
Replace fuel tank assembly
Part arrived when expected, took less than 2 min to put on and fit like a glove trimmer works fine now.
Guest - June 19, 2019
Verified Purchase
★★★★★
★★★★★
Easy inexpensive repair
Real easy to install. I only needed the fuel lines. But, I found that the tank replacement was cheaper than buying the fuel line from a local big box store. The shipment was fast.
Guest - June 19, 2019
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove handle, disconnect throttle linkage from carb remove spark plug, insert a nylon rope into engine so that you can remove torx screw to take drum off, spin old clutch off counterclockwise, install new clutch, install new drum, reinstall handle and connect throttle cable...gas tank remove two gas lines remove 2 mounting screws....inst
... Read moreall tank and hook up 2 lines
Read less
Did you find this story helpful?
Thank you for voting!
String Trimmer / Edger almost impossible to start and keep running
Following the instructions I found here, I removed and replaced the fuel tank and carburetor. Whole thing took about 20 minutes. Pumped the fuel bulb, Pulled the rope, and there I was, Master of the Universe! Awesome.... Only thing that was remotely tricky was caring for the paper gasket under the carb. Used an exacto knife to slide
... Read moreunder the gasket to make sure it didn\'t tear.
I tried to clean the carburetor out, with no luck. Gas trimmer would start, but would die shortly after starting. I ordered a new carburetor and o-ring, fuel tank which included new fuel lines and filters, and a new spark plug. I also purchased, not through this site, a set of carb adjustment screw drivers. Removal and installation of
... Read more the new parts took about 10 minutes. Trimmer fired up right away, but didn\'t run properly. After making a few adjustments on the carburetor, with the proper tools, trimmer runs like new. Saved myself a good amount of money, because if this didn\'t work, I was ready to throw it in the trash and get a new trimmer. Carburetor through this site was a factory direct replacement of the original carb I pulled off the trimmer. Could have saved a few bucks buying from another site, buying a knockoff carburetor on Amazon. You will get a genuine Walbro, like was installed from the factory, for your trimmer. Would definitely recommend if your having the same issues I was experiencing. Getting a set of carburetor adjustment screwdrivers was key to making this happen. They are fairly cheap, got a set of 8 for about 18 bucks. If you don\'t want a set, you will need a single d screwdriver to make adjustments. My project was on a Troy-Bbilt TB-22EC trimmer.
Read less
Did you find this story helpful?
Thank you for voting!
Trimmer would only run on full choke and tank was cracked
Remove the two screws holding the tank to the unit. Remove the fuel lines and remember where they are connected. Then remove the tank and install the new one. To install the new carburetor. Remove the air filter cover and the air filter. Remove the two screws holding the carburetor to the engine and remove the throttle. Then remove the ol
... Read mored carburetor and install the new one. Tighten the screws. Then place the fuel lines on the carburetor and the throttle. Replace the air filter, then pump the primer to remove the air from the fuel lines. It should start within a few pulls on the starter rope.
Very easy, parts were an exact fit. Two screws were removed to replace carburetor and two more screws were removed to replace the gas tank. Very happy with the replacement parts. will use eReplacement again.
Removed 4 bolts and installed new parts. One throttle line easily unhooked, then hooked into new carburetor. Found ethanol free gas at local marina (boats use ethanol free gas). Totally easy fix that would have cost $80 plus parts, and only cost just over $20.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9118299
Manufacturer Part Number: 753-06183
Trimmer
- MTD String Trimmer Model 41AD110G983 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Tank or Container","title":"Tank or Container","url":"/parts/lawn-and-garden/trimmer/tanks-and-containers/"},{"position":2,"name":"753-06183","title":"753-06183","url":""}]
