It is an authentic item that is supplied by the original equipment manufacturer for use with handheld lawn and garden equipment. This is an identical replacement for a missing or a faulty spindle that was installed on a new unit. The spindle attaches to the mower and is driven by the belt. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality part is made of durable metal and is sold individually. Note, the hardware to secure it is sold separately.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
JUST WHAT I NEEDED
part arrived on but institution on repaleing it was hard
Guest - May 20, 2020
Verified Purchase
★★★★★
★★★★★
The bolt holes were not treaded However I managed to install it it works perfect a complete tepair
It Fit perfectly works like a new one
Guest - May 27, 2020
Verified Purchase
★★★★★
★★★★★
Great Response
I had been dealing with Craftsman for 3 weeks before my son told me of this site. They said they had the part and did not. You got it to me quickly. Works great after modification. Holes to attach to machine on old part had threads for large screws. No threads on this part and could not make threads. Used bolts. I still have not complaint. I will buy parts from your company again when needed and recommend you highly. Thanks again.
Guest - July 14, 2020
Verified Purchase
★★★★★
★★★★★
Great part
Could not find this local. Just wanted was needed to fix wheeled weed trimmer!!! Great buy!!!
Guest - August 4, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
The complete assembly bolted right up
Guest - October 12, 2020
Verified Purchase
★★★★★
★★★★★
Great Part - Worked as Expected -- Fast Shipping as Always
Removed Front plastic cover by 1 star screw in the very front, pulled the drive belt out of the spindle pulley so I could get to all four bolts that held the spindle in place, removed all 4 bolts then removed spindle assembly, I did the reverse - installed the 4 bolts secured the belt drive back on. Had to make sure the belt was on at both ends (front and back) the back did fall off, installed plastic cover and went to work. I did use the old bolts and used them as self-tapping / self-drilling, and actually started the bolts before I started the attachment. Some had indicated they had used bolts, and I believe bolts would have been a lot easier than self-tapping the holes into the new spindle. I probably spend about an hour in exchanging the old one out and the new one in.
Buster G - May 24, 2021
Verified Purchase
★★★★★
★★★★★
Awesome
Great prices and fast shipping! Thanks
Guest - June 19, 2021
Verified Purchase
★★★★★
★★★★★
Just like original
Works like new, wouldn't say it was an easy fix but that wasn't the parts fault, it went on as expected and works great. Easy to order from and very quick delivery, sooner than expected.
Guest - July 9, 2021
Verified Purchase
★★★★★
★★★★★
fit well, went together easily, had to buy bolts, old machine was tapped.
The complete spindle assembly fit well. The old weed trimmer it was for was tapped for bolts, this spindle was not so I had to supply bolts since I did not have a tap available. Machine now works as designed. Part was delivered on time and in good condition. Thanks.
Harry - August 14, 2021
Verified Purchase
★★★★★
★★★★★
Perfect match , easy repair.
Works great!!
Guest - August 29, 2021
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
The repair was not fast as it should of been.
The new part came in and there was no threads for the bolts.
When I took the bad part off, notice the bolts were not self tapping
Had to find a tap set for the four bolts and match the threads.
Once that was completed I installed the new part and tested.
So far it
... Read more is working correctly.
I would recommend having the spindle assembly come already threaded.
Or have the manufacturer put self tapping bolts in their product.
Read less
Did you find this story helpful?
Thank you for voting!
The spindle came apart on the lower half with new spindle its back up and mowing
1. Broke down front assembly and removed v-V belt.
2. Disassembled to pully tensioning system (take a pic before hand to get it back on correctly)
3. Broke down tensioning pulleys and changed to new belt.
4. Replaced tensioning spring (broken) and drive control hookups
5. Reinstalled tensioning pully system and spi
... Read morendle assembly.
6. Installed V belt on engine pulley.
7. Hooked up new drive control cable to handle and tested.
1. Removed Front plastic cover by 1 star screw in the very front.
2. Pulled the drive belt out of the spindle pulley so I could get to all four bolts that hold spindle in place.
3. Removed all 4 bolts then removed spindle assembly.
4 did the reverse installed the 4 bolts secured the belt drive back on.
5. Had to ma
... Read moreke sure the belt was on at both ends (front and back) the back did fall off.
6. Installed plastic cover and went to work.
1. remove trim cover
2. removed the first two bolts on the sides of the trim \'red\' cover
3. tilt the trimmer back to view the four bolts holding the assembly
4. reinstall
1. Read instructions provided online by ereplacements.
2. Read about experience of others and their suggestions.
3. Removed battered old assembly and replaced with new assembly provided.
4. Started it up and it operates as good as new.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16382482
Manufacturer Part Number: 596878501
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
