This is a genuine Black & Decker replacement part, sold individually. This Replacement Spool eases the tedious work of hand-winding spools. 30-foot factory-wound replacement spool features a .065-inch diameter line utilizes centrifugal force to automatically feed the cutting string while eliminating bumps and hitches. It is compatible with the Trimmers listed below.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
7 year old weed eater works like new again:O)
Before I realized I could replace the line feeder and spool I nearly bought a new weed eater. For $10 my trusty 7 year old weed eater works like new again. Everything about this company and it's products was top notch! The customer service whom I placed the order with could not have been more helpful. As a 60 something women, to be able to diagnose & repair my weed eater and have it work was a HUGE satisfaction!!!!
Guest - July 23, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected.
The parts are just what ordered.
Guest - July 24, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair
Arrived quickly, fits perfectly.
Minerva - November 21, 2019
Verified Purchase
★★★★★
★★★★★
worked as expected.
The part is fine, but it took over a week for me to receive it. This was the fault of the postal service, since I kept getting emails as to when they received it and where it was located.
Guest - November 26, 2019
Verified Purchase
★★★★★
★★★★★
It cuts grass
Fit my weed wacker perfectly. Arrived quickly.
Guest - April 13, 2020
Verified Purchase
★★★★★
★★★★★
No difference!
Paid $10 each for these reels and still the thread feeds out too fast and too long just like the ones I got at Walmart!
Guest - August 9, 2022
Verified Purchase
August 9, 2022
Thank you for your review. We're sorry to hear that happened, we will be in touch soon to help fix this issue.
★★★★★
★★★★★
Don't know, hence the one star.
Just returned home from a hospital stay, therefore haven't used the parts yet. At this point I can't verify anything and it will probably be quite a while before I can even be sure the parts fit. I will say that the ordering experience was a good one, smooth with no problems. Thank you.
Guest - May 9, 2019
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
Less than 15 mins
(21 rated repairs)?
< Prev
1
2
3
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
All you need to do is simply detach the line for the holder, run through hole on trimmer, and put spool in place. These are factory wound so I order three spools a season and replace the whole spool rather than re-string an existing spool. The factory wind works much better in terms of feeding and longevity. I recycle the old spools.
Did you find this story helpful?
Thank you for voting!
The cover broke, and the spool was chewed with wear
Everything snapped in place without problem. I\'m a 72 year old woman who was shy about ordering the parts and trying to repair the weed eater myself, but the parts were easy to find on your website, and putting the parts together was a snap.
Did you find this story helpful?
Thank you for voting!
My cover for the spool and the spool had problems after winter.
I removed the cover by pressing on the side tabs, and removed it, removed the spring and the spool. Placed the spool in correctly Then I let some of the line out out of the spool housing. Placed in the spring and press the cap back on to secure the spool. These parts have made it run great since.
The parts were correct and f
... Read moreit perfectly.
Installed new spool and let some line out off the spool housing. I then placed the spring on the cap and lined up the cap with the spool housing holes and pressed it in.
Did you find this story helpful?
Thank you for voting!
While weed eating hit a wire fence parts flew - lost the lever bump cover warped
Replaced spool. Simply took off the cover, removed old spool and secured the new one in place. Ran the line and reattached the cover. Trimmer runs great!
Did you find this story helpful?
Thank you for voting!
Spool cover worn, spring missing, replaced spool with new one
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
