This is an authentic OEM replacement part designed for use with Black and Decker string trimmer. The purpose of it is to direct debris away from the user. This guard is made out of plastic and it is sold individually. To complete this repair you would need a screwdriver. • Remove the screw from the bottom of the old guard and replace it • Insert the guard into the motor housing until it "snaps" into place • Reinsert the screw through the hole in the guard and tighten
Troubleshooting
This part works with the following brands:
Black and Decker
This part works with the following products:
Trimmer
Part# 90558494 replaces these:
90558494,
★
Customer Part Reviews
?
4.0
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
5 stars
1
4 stars
1
3 stars
1
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Timely service, accurately filled order
The part was correct and fit the weed cutter.
Guest - June 1, 2020
Verified Purchase
★★★★★
★★★★★
Easy to find right part.
Diagrams and part, model, etc. were easy to read and process was flawless.
Vince - July 20, 2019
Verified Purchase
★★★★★
★★★★★
Guard Assembly won't snap into place
Part came quickly - thank you! - but it won't fit my weedeater. Can't get it to snap into place so I can then insert the screw and secure it. Oh, well! It's an original B & D part, so that can't be the problem...Called you, told don't have tech support, gave me B & D's toll-free number. Am working with the trimmer with the guard assembly partly in place instead. Works OK but doesn't fit, for sure.
Guest - July 17, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed the old guard by looking at the new one and seeing where the plastic spring clips were.
2. Installed the new guard. Added the screw to secure.
3. Snapped the new lever into the base of the spool housing.
4. Installed the new spool housing, added the screw with an Allen wrench to secure.
5. Installed the
... Read morenew spool full of trimming line into the housing.
6. Snapped the new cover into the top of the housing, done!
I put the guard assembly on the motor housing. I also needed to replace the spool housing and lever. The lever had to be removed with a hex socket driver.
Ordered new guard (as the old guard the auto cut off fell off). Paid 12.00 for new guard to be shipped to my location arrived in 2 days. Back in business. Install it with one screw and slid it on.
Did you find this story helpful?
Thank you for voting!
Guard assembly was missing the line cutter edge that controlled the line feed
1. Removal of a single retaining screw in base of guard assembly
2. Insert screw driver into opening on guard base enabling release of a \'retaining\' flap
3. Pull guard assembly off base and replace with new guard assembly which snaps into place
4. Insert retaining screw and tighten
Removed screw from guard, Found it very hard to remove the guard because of plastic clip,Used very large flat screw driver to remove and used soft mallet to put new guard back on because of plastic clip,Then just screwed in in
1. Removed the older guard by taking the one screw out
2. Used a flat head screw driver to release the guard.
3. Aligned the new guard and pushed it into place until I heard a \"click.\"
4. Tightened the new screw so that the guard was firmly in place.
Did you find this story helpful?
Thank you for voting!
Edge guide had been lost and \"string\" cutter blade had detached from shield
Remove the old guard assembly with one screw and took it off. Then installed the new guard with the same screw. And snapped the the new guide into the housing
Quick and simple!
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18988366
Manufacturer Part Number: 90558494
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Cap or Lid","title":"Cap or Lid","url":"/parts/lawn-and-garden/trimmer/caps-and-lids/"},{"position":2,"name":"90558494","title":"90558494","url":""}]
