Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
11928747-1-M-DeWALT-90552006-Belt
Part Location Diagram of 90552006 DeWALT Belt
See part 4 in the diagram
11928747-1-S-DeWALT-90552006-Belt 360 view
( Grid squares measure 1x1 inch )
11928747-1-S-DeWALT-90552006-Belt 11928747-2-S-DeWALT-90552006-Belt 11928747-3-S-DeWALT-90552006-Belt 11928747-1-S-DeWALT-90552006-Belt 360 view
Part Location Diagram of 90552006 DeWALT Belt

Belt 90552006

Manufactured by:
DeWALT
ERP Number:
ERP11928747
Part Number:
90552006
Original Equipment Manufacturer ?
$9.30
★★★★★
★★★★★
14 Reviews
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(26 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Frequently Purchased Together Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is a genuine Black and Decker replacement part, it s sold individually. This belt is installed on the drive pulley and driven pulley on the motor assembly on the models listed below. The flex shaft is connected to the larger pulley which rotates the spool and cutting line on the trimmer. Over time the cogs on the belt will become worn and the belt will have to be replaced.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Black and Decker
This part works with the following products:
  • Trimmer
Part# 90552006 replaces these:
90552006,
★

Customer Part Reviews

?
4.4
Average Rating (out of 5):
★★★★★
★★★★★
(14 Reviews)
Click to filter by ratings:
  • 5 stars
    11
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    2
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gh1000 Belt
Always a pleasure to deal with ereplacement parts. The correct part with super fast shipment. Gets you back in business very quickly.
Guest - April 29, 2019
Verified Purchase
★★★★★
★★★★★
weed trimmer belt
The belt for my weed trimmer was the exact fit and works well.
Guest - May 6, 2019
Verified Purchase
★★★★★
★★★★★
Well done.
This was not the easiest part to find, but you folks had it and it fit just fine. Old B&D electric trimmer works again after some years of inactivity due to my laziness in taking the housing apart. Almost scrapped it a time or two. Glad I didn't as the replacement I'd purchased just wasn't up to the tasks. This one was for many years and now is again. Part arrived quickly. Took me longer to put all those housing screws back in than it did to install the belt thanks to some helpful tips other customers posted.
Guest - May 29, 2019
Verified Purchase
★★★★★
★★★★★
Grass hog belt replacement
Fast delivery of a belt drive for my grass hog weed eater. No problem replaced belt knocked down some weeds in back yard worked good.
Guest - June 18, 2019
Verified Purchase
★★★★★
★★★★★
Quick fix
Quick service,good price, part fit,
Guest - July 4, 2019
Verified Purchase
★★★★★
★★★★★
Fit
arrived in good condition
Guest - August 7, 2019
Verified Purchase
★★★★★
★★★★★
Fast Delivery and right part
Very nice quality replacement belt which I installed and my Black & Decker GH 1000 runs like new.
Guest - June 1, 2020
Verified Purchase
★★★★★
★★★★★
Super quick and the part worked perfectly!
the part worked perfectly!
Guest - June 3, 2020
Verified Purchase
★★★★★
★★★★★
Easy peacy
Customer service helped me identify the correct part needed. I received it in a timely manner which was great. I installed it and it fit like a glove. Thank you guys for an awesome job all the way thru. .
Guest - April 8, 2021
Verified Purchase
★★★★★
★★★★★
VERY PLEASE WELL CALL SOON THANK YOU
THE PART WORK GREAT
John - June 9, 2022
Verified Purchase
  • 1
  • 2

Questions & Answers

?

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
The belt from motor to shaft keeps slipping off the slotted gear cam. Is there a way to put a piece of wood or plastic against the gear to prevent the slippage?
Garth For model number B and D GH1000 trimmer - April 25, 2022

Hello Garth, thank you for your question. We don't recommend putting wood or plastic. You may want to check that Belt 90552006 and Drive Pulley 478626-00 are still in good working condition. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

eReplacementParts Team
April 25, 2022

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(26 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Broken belt

Riyaz from Irvine, California

25 of 26 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
90552006
After unscrewing the 20 screws, make sure you keep them safe. After removing the cover, take a picture in case you forget how it looks after assembly. It is easier to remove broken belt but requires some effort to replace. First remove the shaft from the trimmer, and gently lift the motor. The belt has to go around the motor and the gear which drives the trimmer. First pass the belt around the trimmer gear, and secure with one hand, or ask someone to hold it firmly. Pass the belt on one side of the motor gear and holding it firmly, rotate the motor gear. If you succeed in rotating half circle, the fan belt should snugly fit.
Put the motor back into is hub. Insert the trimmer shaft, make sure all wiring is out of harm\'s way, and close the cover piece.
Read less
Did you find this story helpful?
Thank you for voting!

Belt broke

Jay from Mequon, Wisconsin

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
90552006
Remove the screws from the housing. Then separate carefully. Take a picture of where the internal parts are located. Remove the motor from the housing. And remove the flex shaft. Place the belt on the large pulley, then start it on the edge of the small pulley while rotating the belt and pushing it on the small pulley. It might take a few tries, but it can be done. Once you have the belt on, put the flex shaft back in and place the motor where it was before. Make sure all of the internal parts are where they should be. Then assemble the housings.
Read less
Did you find this story helpful?
Thank you for voting!

Broken belt

Mikel from Olympia, Washington

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
90552006
The tooth belt on this model wears out every two-three years. The change is pretty straight forward. You need to remove a lot of screws holding the two halves together, some are hidden under decals. Be careful to note the position of the various parts that may move as you separate the halves, especially a little spring that works the butt on for rotating the shaft. Remove the old belt if still in one piece and put the new one over the gear on both parts. Making sure all is in place, reinstall the two halves with the many screws. While apart it is a good time to check other parts especially the shaft for general wear and lubrication.
Read less
Did you find this story helpful?
Thank you for voting!

Belt worn

john from Herrin, Illinois

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
90552006
Remove the screws from the motor housing. Separate the halves, take a picture of the inside of the housings to see where all of the parts are placed. Remove the motor. Remove the worn belt. Install the new belt by placing it on the large pulley first, then start it on the edge of the small pulley. Start rotating the belt by turning the la rge pulley. While it is rotating the belt push it on the small pulley. Another pair of hand really helps. Once you have it on, assemble the parts inside and screw the housing together.
Read less
Did you find this story helpful?
Thank you for voting!

Loss of power, trimmer would not turn fast enough to trim

James from Pensacola, Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Parts Used:
90540850, 90552006
Opened up housing (fifteen screws) and found power belt was worn. Also head where the line goes looked worn. Replace both and closed up housing. Worked like new.




















Did you find this story helpful?
Thank you for voting!

Trimmer belt broke.

Guadalupe from Kennewick, Washington

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
90552006
Replaced the old belt with the new belt.
Did you find this story helpful?
Thank you for voting!

Drive belt broke

Bob from Forsyth, Missouri

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
90552006
Opened housing and replaced the drive belt.
Did you find this story helpful?
Thank you for voting!

Broken belt between moter and spindle.

Joseph from Springfield, Pennsylvania

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
90552006
Replaced belt.
Did you find this story helpful?
Thank you for voting!

The belt broke on trimmer

James from Belleville, New Jersey

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
90552006
I took the trimmer apart replaced the belt.
Did you find this story helpful?
Thank you for voting!

Stripped cog belt & broken guard

CHARLES from WILLIAMSTOWN, West Virginia

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
90552006, 478535-00
Opened housing by removing phillips screws. Changed belt & reassembled. Ran for 15 minutes then the guard broke. Should have checked with previous parts order but didn\'t.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP11928747
Manufacturer Part Number: 90552006
Brand Model Number Description
Black and Decker GH1000 Trimmer - 14" String Trimmer
Black and Decker GH1000-AR Trimmer - 900w Grass Trimmer/Edger
Black and Decker GH1000-B2 Trimmer - 900w Grass Trimmer/Edger
Black and Decker GH1000-B2C Trimmer - 900w Grass Trimmer/Edger
Black and Decker GH1000-B3LZ Trimmer - String Trimmer - Fob Inte
Black and Decker GH1000-BR Trimmer - 900w Grass Trimmer/Edger
Black and Decker GH1100 Trimmer - Grass String Trimer
Black and Decker GH1100-B2C Trimmer - 1000 Watts String Trimmer
Black and Decker GH1100-B3LZ Trimmer - 1000 Watts String Trimmer
Black and Decker GH2000 Trimmer - Trimmer
Black and Decker GH2000LW Brush Cutter - 14 Grass Hog
Black and Decker GL1000-AR Trimmer - 900w String Trimmer
Belt
$ 9.30
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖