This replacement spool housing is an authentic OEM component which is specially made for Black and Decker and DeWALT handheld trimmers. The housing makes up the body of the cutting head and links the spool to the driver shaft. If it is damaged or is missing, this will provide an identical replacement for the original part that was installed on a new unit. This high-quality item is made of durable plastic and is available as an individual component. Make sure to refer to the owner's manual and the appropriate diagrams for your model to ensure the correct application.
Troubleshooting
This part works with the following brands:
Black and Decker
This part works with the following products:
Trimmer
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed screw at bottom of spool housing with an allen wrench. I put the new lever into position above in the housing above the spool. Pretty easy repair.
Did you find this story helpful?
Thank you for voting!
Trimmer line housing broke, cap was worn, lever latch not working.
1. Removed the old guard by looking at the new one and seeing where the plastic spring clips were.
2. Installed the new guard. Added the screw to secure.
3. Snapped the new lever into the base of the spool housing.
4. Installed the new spool housing, added the screw with an Allen wrench to secure.
5. Installed the
... Read morenew spool full of trimming line into the housing.
6. Snapped the new cover into the top of the housing, done!
Removed the bottom cover
Remove the spool
Removed the worn spool housing
Pressed the new lever into the new spool housing
Attached the new spool housing to the trimmer
Replaced the spool
Press the new bottom cover on
Works like new!
I put the guard assembly on the motor housing. I also needed to replace the spool housing and lever. The lever had to be removed with a hex socket driver.
Removed screw located at the center of the old spool housing, then I removed housing from trimmer. Inserted new lever into new spool housing, placed housing back in the trimmer and put the screw in tighten the screw. Bingo my trimmer was ready to go.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
