Part Location Diagram of A200378 Powermate Drag Bar, Three Hole
See part C-16 in the diagram
( Grid squares measure 1x1 inch )

Drag Bar, Three Hole A200378

Manufactured by:
Powermate
ERP Number:
ERP10105682
Part Number:
A200378
Original Equipment Manufacturer ?
  Works with your model  PFTT142!
$38.59
Special Order

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   PFTT142!

Product Description

?

This is an authentic Powermate replacement part that has been sourced from the original manufacturer to be used with rear tine tillers. The metal drag bar fits into the swing plate at the back of the tiller. The drag bar digs into the ground behind the tiller to prevent the tiller from moving forward too quickly from the action of the tines. The drag bar has three holes for different depth settings and is sold as a single replacement part.

Troubleshooting

This part works with the following brands:
  • Powermate
This part works with the following products:
  • Tiller

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

FUEL SAT IN CARBURETOR FOR SEVERAL YEARS, GAS WENT BAD IN CARB

Bruce from BATTLE GROUND, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
A201659, A200379, A200378
REMOVED THE CARB & CLEANED IT OUT, INSTALLED NEW GASKET KIT.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10105682
Manufacturer Part Number: A200378
Brand Model Number Description
Powermate PFTT140 Tiller - Front Tine Tiller
Powermate PFTT1401 Tiller - Front Tine Tiller
Powermate PFTT140BE Tiller - Front Tine Tiller
Powermate PFTT142 Tiller - 11 In. 150cc Gas Front Tine Tiller
Powermate PFTT1421 Tiller - 11 In. 150cc Gas Front Tine Tiller
Powermate PFTT150B Tiller - Front Tine Tiller