All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(7 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Motor stopped working. Plug connection and circuit breaker OK. After removing switch cover, could start motor by manually depressing switch mechanism but switch would not stay engaged.
1. Unplugged saw.
2. Removed old switch cover with screwdriver.
3. Made a drawing of the wires and terminal connections in switch box.
4. Pulled wires off terminals with needle-nosed pliers.
5. Unscrewed old switch box from machine.
6. Unscrewed plastic devices surrounding the ports where the wires entered an
... Read mored left the switch box.
7. Pulled the old switch box free from the wires.
8. Installed new switch following steps 1-7 in reverse order. Note that the some terminals were in locations different from old switch.
Unplugged the machine
Took the cover off
Removed the brace from the bottom of the switch
Removed the wires, one at a time and made note of each position
Unsnapped the grommets holding the wires and removed the switch box
Reinstalled the new switch box in reverse order
Attached wires in the correct
... Read more places
Replaced cover
Plugged saw up and started it
Remove front cover front switch and either take a picture or make a wiring diagram. Disconnect wires from old switch and remove switch from saw. Mount the back of the new switch to the saw, and run the wires thru it. Connect them like the wiring diagram, then place the front of the switch on.
Remove the front cover of the switch, and make a wiring diagram.
Disconnect the wires from the switch
Remove the back of the switch, pull wires through
Attach the the back of the new switch and pull the wires through
Connect the wires to the switch
Install the front cover
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19158082
Manufacturer Part Number: JT9-JTAS10-23
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of JT9-JTAS10-23 Jet MAGNETIC SWITCH 230V 1PH")
_WW_1.gif "Part Location Diagram of JT9-JTAS10-23 Jet MAGNETIC SWITCH 230V 1PH")
