- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Motor Assembly 489129-00
- Manufactured by:
- Delta
- ERP Number:
- ERP10325616
- Part Number:
- 489129-00
Product Description
?This part is available as an individual replacement. The motor is made out of durable materials. When replacing this item a screwdriver and a socket set may be needed. It will need to be replaced if it becomes broken. This is an authentic Delta and Black & Decker replacement part that is sourced from the original manufacturer for use with table saws.
Troubleshooting
- Delta
- Black and Decker
- Table Saw
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Motor overheated
Robin from Jackson, California
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench set
- Parts Used:
- 489129-00
I had to replce the drive motor because it burned up.
DAVID from OWASSO, Oklahoma
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
- Parts Used:
- 489129-00
2. Found the numbers to order the new motor.
3. Recieved the new motor.
4. Installed the new motor. Used10mm socket, #2 phillips, wrenches to install the blade.
5. Turned it on, and went to work!
Thanks!
The saw blade looked uneven and I suspected the motor shaft was compromised.
Chris from MANSFIELD, Massachusetts
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Socket set
- Parts Used:
- 489129-00
The Motor quit running blew the breaker.
Jackie from CANADIAN, Texas
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set, Wrench set
- Parts Used:
- 489129-00
The motor went up in smoke and flame
Scot from GRAYLING, Michigan
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set, Wrench set
- Parts Used:
- 489129-00
1 Removed wiring from on-off switch
2 Removed saw blade
3 Removed motor
4 Reverse the disassembly process to reassemble
5 Plug it in and start using it
Motor went out on table saw
Adley from Cottonport, Louisiana
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Wrench (Adjustable), Wrench set
- Parts Used:
- 489129-00
Installed the motor and connected the wires
- < Prev
- 1
- Next >
Model Cross Reference
Manufacturer Part Number: 489129-00
| Brand | Model Number | Description |
|---|---|---|
| Delta | 36-540 | Table Saw - 10" Bench Saw |
| Delta | 36-545 | Table Saw - 10" Bench Saw |
| Delta | 36-546 | Table Saw - 10" Bench Saw |
| Black and Decker | BDTS100 | Table Saw - Table Saw |
| Delta | SM200L | Table Saw - Table Saw |
| Delta | TS200 | Table Saw - Table Saw |
| Delta | TS200LS | Table Saw - Table Saw |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.