Part Location Diagram of 489129-00 Delta Motor Assembly
See part D-856 in the diagram
( Grid squares measure 1x1 inch )

Motor Assembly 489129-00

Manufactured by:
Delta
ERP Number:
ERP10325616
Part Number:
489129-00
Original Equipment Manufacturer ?
$469.01
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

15 - 30 mins 

(6 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This part is available as an individual replacement. The motor is made out of durable materials. When replacing this item a screwdriver and a socket set may be needed. It will need to be replaced if it becomes broken. This is an authentic Delta and Black & Decker replacement part that is sourced from the original manufacturer for use with table saws.

Troubleshooting

This part works with the following brands:
  • Delta
  • Black and Decker
This part works with the following products:
  • Table Saw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

15 - 30 mins 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Motor overheated

Robin from Jackson, California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Parts Used:
489129-00
Removed the old motor and put the new motor in.
Did you find this story helpful?
Thank you for voting!

I had to replce the drive motor because it burned up.

DAVID from OWASSO, Oklahoma

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
489129-00
1. Removed the old motor.
2. Found the numbers to order the new motor.
3. Recieved the new motor.
4. Installed the new motor. Used10mm socket, #2 phillips, wrenches to install the blade.
5. Turned it on, and went to work!
Thanks!
Did you find this story helpful?
Thank you for voting!

The saw blade looked uneven and I suspected the motor shaft was compromised.

Chris from MANSFIELD, Massachusetts

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
489129-00
While removing the old motor, I made note of how everything fit together. You can take a picture of it with your phone. This made putting in the new motor a smooth process. After the new motor was installed, the table saw runs beautifully again.
Did you find this story helpful?
Thank you for voting!

The Motor quit running blew the breaker.

Jackie from CANADIAN, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
489129-00
Took the old motor off and put the new one on. It was very easy!
Did you find this story helpful?
Thank you for voting!

The motor went up in smoke and flame

Scot from GRAYLING, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
489129-00
Be sure device is unplugged from power source
1 Removed wiring from on-off switch
2 Removed saw blade
3 Removed motor
4 Reverse the disassembly process to reassemble
5 Plug it in and start using it
Did you find this story helpful?
Thank you for voting!

Motor went out on table saw

Adley from Cottonport, Louisiana

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Wrench (Adjustable), Wrench set
Parts Used:
489129-00
Turned the saw upside down and removed the motor and disconnected the wires
Installed the motor and connected the wires
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10325616
Manufacturer Part Number: 489129-00
Brand Model Number Description
Delta 36-540 Table Saw - 10&#34 Bench Saw
Delta 36-545 Table Saw - 10&#34 Bench Saw
Delta 36-546 Table Saw - 10&#34 Bench Saw
Black and Decker BDTS100 Table Saw - Table Saw
Delta SM200L Table Saw - Table Saw
Delta TS200 Table Saw - Table Saw
Delta TS200LS Table Saw - Table Saw