1. Removed the outer housing (removed bolts)
2. Removed the bolt holding in the pully
3. Removed pully belt at same time
4. Replace both pully and belt
5. Put the outer housing back on (re-inserted the old bolts)
6. The owner\'s manual (page 15) tells you how to do it. Pictures are helpful.
Basically followed the owners manual for repair (pg 15). Removed the drive-belt cover by removing 3 bolts. Next unhooked the brake spring from the idler arm. Next remove the screw and curved washer that holds the rotor pulley. Remove the rotor pulley and the drive belt. Finally, install the new drive belt as shown in the owners manual
... Read more. The owners manual is all the average owner needs. Less than 30 minutes for the whole operation. Piece of cake!!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP11804569
Manufacturer Part Number: 121-6622
Snow Blower
- Toro Snowblower Model 38751/SERIAL: 315000001-315999999 (38751/SERIAL:315000001315999999, 38751/SERIAL: 315000001 315999999) Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 121-6622 Toro Belt-drive")
_WW_1.gif "Part Location Diagram of 121-6622 Toro Belt-drive")
