Part Location Diagram of 121-6622 Toro Belt-drive
See part A-11 in the diagram
( Grid squares measure 1x1 inch )

Belt-drive 121-6622

Manufactured by:
Toro
ERP Number:
ERP11804569
Part Number:
121-6622
Original Equipment Manufacturer ?
$23.78
On Order

Easy 

Less than 15 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Toro
This part works with the following products:
  • Snow Blower

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

pully was bad (wobbled) and was noisy.

John from Helena, Montana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
121-6622
1. Removed the outer housing (removed bolts)
2. Removed the bolt holding in the pully
3. Removed pully belt at same time
4. Replace both pully and belt
5. Put the outer housing back on (re-inserted the old bolts)
6. The owner\'s manual (page 15) tells you how to do it. Pictures are helpful.
Did you find this story helpful?
Thank you for voting!

Drive belt had broken (disentragated)

John from Helena, Montana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
121-6622
Basically followed the owners manual for repair (pg 15). Removed the drive-belt cover by removing 3 bolts. Next unhooked the brake spring from the idler arm. Next remove the screw and curved washer that holds the rotor pulley. Remove the rotor pulley and the drive belt. Finally, install the new drive belt as shown in the owners manual . The owners manual is all the average owner needs. Less than 30 minutes for the whole operation. Piece of cake!!
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11804569
Manufacturer Part Number: 121-6622
Brand Model Number Description
Toro 38563 Snow Blower - Ccr 6053 R Quick Clear Snowthrower
Toro 38568 Snow Blower - Ccr 6053 Es Quick Clear Snowthrower
Toro 38741 Snow Blower - Power Clear 721 R Snowthrower
Toro 38742 Snow Blower - Power Clear 721 E Snowthrower
Toro 38743 Snow Blower - Power Clear 721 QZR Snowthrower
Toro 38744 Snow Blower - Power Clear 721 QZE Snowthrower
Toro 38751 Snow Blower - Toro Snowblower Model 38751/SERIAL: 315000001-315999999 (38751/SERIAL:315000001315999999, 38751/SERIAL: 315000001 315999999) Parts