Part Location Diagram of 338965MA Murray Pulley,v3l 6.00 O.d.
See part A7 in the diagram
( Grid squares measure 1x1 inch )

Pulley,v3l 6.00 O.d. 338965MA

Manufactured by:
Murray
ERP Number:
ERP9276715
Part Number:
338965MA
Original Equipment Manufacturer ?
  Works with your model  SN421!
$51.89
Special Order

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  Works with your model   SN421!

Product Description

?

Pulley v3l 6.00 o.d.

Troubleshooting

This part works with the following brands:
  • Murray
  • Briggs and Stratton
  • Craftsman
This part works with the following products:
  • Snow Blower
Part# 338965MA replaces these:
301855MA, 338965MA, MT338965MA,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Auger pulley needed to be replaced

Joseph from Chicago, Illinois

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
Parts Used:
338965MA
I had to remove old auger pulley by using a large Cresent wrench.you need to secure the auger so you can unscrew the pulley clockwise then the replacement is put on by screwing it counter clockwise.then I replaced the belt and the auger assembly cover. Tip take a picture of how the drive belt is on the snow blower this will prevent you fr om putting the belt on backwards.



Did you find this story helpful?
Thank you for voting!

Rubber worn down on auger.

Anthony from SHOW LOW, Arizona

0 of 1 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
338965MA
1. Unable to remove old pulley after 21 years of use, locked solidly into bearing.
2. Order new pulley and bearings.
3. Saw auger spindle to remove old auger.
4. Big problem removing old pulley due to the nuts securing the bearing being behind the pulley and
the nuts not being captured, you can turn the bolt f rom the auger side but the nuts which are
completely blocked from view and reach by the pulley cant be secured in order to be removed,
they just spin.
5. Hole-saw a 1 & 1/2 hole thru center of old pulley to allow access to hold nuts solid, remove.
6. install new auger and bearing and spin on new pulley. (Left hand thread)
Good luck.
Did you find this story helpful?
Thank you for voting!

Auger belt Pulley

David from Madison, Maine

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Parts Used:
338965MA
Remove the belt cover
Remove the auger pulley
Replace the parts in reverse order
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9276715
Manufacturer Part Number: 338965MA
Brand Model Number Description
Murray 1695517 Snow Blower - Snow Rex, Single Stage Snow Thrower
Briggs and Stratton 1695517-18-2818-29 Snow Blower - 1695517 - 18-2818-29 Snow Rex, Single Stage Snow Thrower (2008)
Murray 1695520 Snow Blower - 1695520 - Snow Throwers And Other Snow Products
Briggs and Stratton 1695520-18-2816-89SN421 Snow Blower - 1695520 - 18-2816-89 Castelgarden Sn421, Single Stage Snow Thrower (2008)
Murray 1695521 Snow Blower - 1695521 - Snow Throwers And Other Snow Products
Briggs and Stratton 1695521-18-2818-79MN421 Snow Blower - 1695521 - 18-2818-79 Mountfield Mn421, Single Stage Snow Thrower (2008)
Murray 1695522 Snow Blower - 1695522 - Snow Throwers And Other Snow Products
Briggs and Stratton 1695522-18-2816-49HN421 Snow Blower - 1695522 - 18-2816-49 Hurricane Hn421, Single Stage Snow Thrower (2008)
Murray 1695537 Snow Blower - Murray Snowblower Model 1695537 Parts
Briggs and Stratton 18-2816-47 Snow Blower - Hurricane Hn421 21-Inch Snow Thrower
Briggs and Stratton 18-2816-48 Snow Blower - Hurricane Hn421 21-Inch Snow Thrower
Briggs and Stratton 18-2816-49 Snow Blower - Hurricane Hn421 21-Inch Snow Thrower
Murray 536881400 Snow Blower - Craftsman Single Stage Snow Thrower
Craftsman 536881410 Snow Blower - Snowblower
Craftsman 536884431 Snow Blower - Snowblower
Craftsman 536884670 Snow Blower - Snowblower
Craftsman 536885150 Snow Blower - Snowblower
Craftsman 536885170 Snow Blower - Snowblower
Craftsman 536885180 Snow Blower - Snowblower
Craftsman 536885190 Snow Blower - Snowblower
Craftsman 536885200 Snow Blower - Snowblower
Craftsman 536885201 Snow Blower - Snowblower
Craftsman 536885202 Snow Blower - Snowblower
Craftsman 536885203 Snow Blower - Snowblower
Craftsman 536885230 Snow Blower - Snowblower
Murray 620301X4C Snow Blower - 620301x4c - Snow Throwers And Other Snow Products
Murray 620301X4D Snow Blower - Snowblower
Murray 620301X4NA Snow Blower - Murray Snowblower Model 620301X4NA Parts
Murray 620301X4NB Snow Blower - Single Stage Snow Thrower
Murray 620301X4NC Snow Blower - Murray Snowblower Model 620301X4NC Parts