Part Location Diagram of 51279MA Murray Gasket,gear Case Cf 9
See part K-314 in the diagram
( Grid squares measure 1x1 inch )

Gasket,gear Case Cf 9 51279MA

Manufactured by:
Murray
ERP Number:
ERP8998600
Part Number:
51279MA
Original Equipment Manufacturer ?
  Works with your model  1695427!
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  Works with your model   1695427!

Product Description

?

An authentic replacement part that is supplied directly from the original equipment manufacturer for use with Murray and Simplicity snowthrowers. The purpose of this gasket is to ensure a tight seal for the gear box, over time the part may wear out and begin to crack eventually requiring a replacement. It is a high-quality composite material component which is sold individually, please refer to the appropriate diagrams of your model for the correct location and application of this hardware.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Murray
  • Briggs and Stratton
  • Craftsman
  • Simplicity
  • Snapper
This part works with the following products:
  • Snow Blower
Part# 51279MA replaces these:
51279MA, MT51279MA,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

snowbloower auger shaft bent

Ervin from Hatley, Wisconsin

2 of 2 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Socket set, Wrench (Adjustable), Wrench set
disassemble and replace shaft
Did you find this story helpful?
Thank you for voting!

The teeth broke off the front auger

donald from CLARKS GROVE, Minnesota

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench (Adjustable)
Removed belt cover and belt and separated snowblower removed belt pulley and removed bolts holding auger assembly and tapped the auger drive shaft out of rear bearing removed front augers and separated front gear assembly and removed shafts and tapped gear off the the auger shaft and installed new gear and cleaned housing and reassembled and installed new grease and reinstalled augers and impeller and reinstalled back into blower housing and reinstalled belt pulley and reconnected blower assembly to engine assembly and reinstalled belt and shield and rechecked everything and ran blower.
Did you find this story helpful?
Thank you for voting!

Snowblower feed auger, worm gear stripped - ate heavy rug under snow!!!!

Marlyn from Fort Dodge, Iowa

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
703058, 51279MA, 51405MA
1. Removed removed spare breaker bolt box from top of blower
2. Remove auger side guides from frame of throat
3. Loosen pulley back of fed assembly - split fed assembly from body of blower
4. Using pulley puller, removed pulley from shaft (drives gear box)
5. Pull auger assembly from throat housing
6. Slide a ugers off each side of assembly (remove breaker bolts)
7. Separate gear box housing halves - remove brass shavings with grease & all
8. Slide replacement worm gear into position
9. Put new grease into each gear box half, place gasket & tighten halves together
10. Reverse procedure to reassemble

Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8998600
Manufacturer Part Number: 51279MA
Brand Model Number Description
Craftsman 107889650 Snow Blower - Snowblower
Simplicity 1695302 Snow Blower - 924I, 9Tp 24In Snowthrower
Simplicity 1695311 Snow Blower - 924Ie, 9Tp 24In Snowthrower (C
Snapper 1695313 Snow Blower - Snapper Snowblower Model 1695313 Parts
Snapper 1695314 Snow Blower - Snapper Snowblower Model 1695314 Parts
Murray 1695361 Snow Blower - 24&#34 Dual Stage Snowthrower
Briggs and Stratton 1695361-6240810X54 Snow Blower - 1695361 - 6240810x54, Dual Stage Snowthrower (2007)
Murray 1695362 Snow Blower - 24&#34 Dual Stage Snowthrower
Briggs and Stratton 1695362-6240810X61 Snow Blower - 1695362 - 6240810x61 Dual Stage Snowthrower (2007)
Murray 1695372 Snow Blower - 24&#34 Dual Stage Snowthrower
Briggs and Stratton 1695372-6240900X43 Snow Blower - 1695372 - 6240900x43, Dual Stage Snowthrower (2007)
Murray 1695382 Snow Blower - 24&#34 Dual Stage Snowthrower
Craftsman 1695382-C950-52729-0 Snow Blower - 1695382 - C950-52729-0, Craftsman 24" Dual Stage Snowthrower (2007)
Simplicity 1695410 Snow Blower - 924Ir, 9Tp 24In Snowthrower (C
Snapper 1695411 Snow Blower - Snapper Snowblower Model 1695411 Parts
Murray 1695425 Snow Blower - 24&#34 Dual Stage Snowthrower
Briggs and Stratton 1695425-6240900X196A Snow Blower - 1695425 - 6240900x196a, Dual Stage Snowthrower (2007)
Murray 1695427 Snow Blower - 24&#34 Dual Stage Snowthrower
Craftsman 1695427-C950-52721-0 Snow Blower - 1695427 - C950-52721-0 Craftsman Dual Stage Snow Thrower (2007)
Murray 1695444 Snow Blower - Murray Snowblower Model 1695444 Parts
Briggs and Stratton 1695444-LP1695444-726E Snow Blower - 1695444 - Lp1695444 - 726e, Dual Stage Snow Thrower (2008)
Murray 1695459 Snow Blower - 26&#34 Dual Stage Snowthrower
Murray 1695505 Snow Blower - 27&#34 Dual Stage Snowthrower
Briggs and Stratton 1695505-18-2830-29 Snow Blower - 1695505 - 18-2830-29 Sno Blizzard Dual Stage Snowthrower (2008)
Murray 1695506 Snow Blower - 27&#34 Dual Stage Snowthrower
Briggs and Stratton 1695506-18-2830-39AN927 Snow Blower - 1695506 - 18-2830-39 Alpina An927 Dual Stage Snow Thrower (2008)
Murray 1695507 Snow Blower - 27&#34 Dual Stage Snowthrower
Briggs and Stratton 1695507-18-2856-29 Snow Blower - 1695507 - 18-2856-29 Sno Unlimited Dual Stage Snowthrower (2008)
Snapper 1695513 Snow Blower - Snapper Snowblower Model 1695513 Parts
Simplicity 1695515 Snow Blower - H924Rx, 9Tp 24In Snowthrower (