This is an original part from MTD and Yard Machines for use with Snow Blowers. The auger drive cable connects the auger control lever on the control panel to the engagement lever in the auger drive system. The most common reason for replacing the cable is when it is broken, causing the snowblower to not properly pick up snow. This part is sold individually. The tool that you will need to replace the auger drive cable is a 3/8" socket.
Troubleshooting
This part works with the following brands:
MTD
Craftsman
Yard Machines
This part works with the following products:
Snow Blower
Part# 946-04236 replaces these:
746-04236, 946-04236,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
With the unit off and cold I removed the belt cover and slipped off the old belts. They were so bad I didn\'t need any tools. Both belts have spring loaded pulleys so to install the belts I slipped on the inside belt first and then the outer one. The cable had 2 hooks and a pulley. With the old cable broken I simply unhooked both ends. I
... Read morere-hooked the end attached to the belt pulley and than ran the cable to the handle. The handle snaps in and out so I removed it and hooked on the cable, then snapped the handle back in.
Read less
Did you find this story helpful?
Thank you for voting!
Kinked and frayed clutch cable on Craftsman snowblower
Removed plastic access cover by unscrewing one screw to allow access to clutch cable to transmission. Disconnected broken cable from transmission and from bracket on snowblower handle. Connected new cable to transmission and bracket on handle. Decided not to replace auger cable at this time as original is still in good condition. A little
... Read more tricky to thread the cable through the hole in the snowblower body from the bottom but figured it out after a few tries.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9311748
Manufacturer Part Number: 946-04236
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
