Part Location Diagram of 954-0430C MTD Snowblower auger drive belt, 3/8 x 35-3/8-in
See part F-23 in the diagram
( Grid squares measure 1x1 inch )

Snowblower auger drive belt, 3/8 x 35-3/8-in 954-0430C

Manufactured by:
MTD
ERP Number:
ERP16585463
Part Number:
954-0430C
Original Equipment Manufacturer ?
On Order

A Bit Difficult 

1- 2 hours 

(11 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a Genuine OEM replacement Belt set designed for use with Snowblower. This part is made out of Rubber and it includes one belt. This belt drives your unit. Make sure to clean pulleys before installing the new belt to ensure top performance and longevity with your new belt. Inspect belt periodically and replace it when worn or stretched to maintain peak performance. You would need a Wrench set and Pliers to replace this belt.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • MTD
  • Yard Machines
  • Cub Cadet
  • Craftsman
  • Husky
  • Troy-Bilt
  • Yard Man
This part works with the following products:
  • Snow Blower
  • Lawn Mower
Part# 954-0430C replaces these:
  • 754-0430
  • 754-0430A
  • 754-0430B
  • 754-0430C
  • 754-0431
  • 954-0430A
  • 954-0430B
  • 954-0430C
  • 954-0430C-CM
  • 954-0431

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(6 Reviews)
Click to filter by ratings:
  • 5 stars
    6
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Need a auger drive belt do you have one?
Glenn For model number 31a 611do62 41372 - February 5, 2022

Hello Glenn, thank you for writing. No, the part you had chosen is not compatible for your model. The correct part for your model number is 954-0430C. We hope to hear from you soon.

eReplacementParts Team
February 5, 2022

Did this question help you?
Thank you for voting!
I have a MTD yardmachines snow blower 22, I would like to know the part number for auger belt for snow thrower Product model number 31A-615D118serial number 1F117B00010does it says ANSI B71 3 -1995 standardsI am not sure it is 1998 , or 1999 or 2000 year model
Sajumon For model number 31A-615D118 - December 27, 2023

Hi Sajumon, Thank you for your question. The part number for the auger belt is 954-0430C. We hope this helps!

eReplacementParts Team
December 27, 2023

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(11 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Belts were damaged and extend, become loose causing smoke and snow propeller stop turning.

WILLIAM from ELMONT, New York

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
954-0430C
Drain the oil. REMOVE gas tank. Turn the snow blower upside down. Remove the plate to have access to the belts and pulley. Replace the belts. And put the plate back. Pour new oil and gas tank. Add gas. Start the engine. Press the handle lever, propeller turn. yeeeeh
Did you find this story helpful?
Thank you for voting!

Drive belts broke

Stan from Florence , Massachusetts

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Parts Used:
954-0430C, 731-1324
Followed directions in owners manual:
Removed two covers
Replaced belts
Replaced covers
Tested machine
Did you find this story helpful?
Thank you for voting!

Drive belts for thrower, both ripped. May have ripped one earlier and then the other

Alfred from Hellertown, Pennsylvania

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
954-0430C
Hardest part was taking all the covers and guards off, then putting them back on. Belts fit nice and snug. Ready for snow.
Did you find this story helpful?
Thank you for voting!

Belts worn out

Francis from BILLERICA, Massachusetts

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Parts Used:
954-0430C
Removed top and bottom covers and replaced drive and auger belts greased and lubed machine.
Did you find this story helpful?
Thank you for voting!

Drive belt broke

Robert from LEBANON, New Hampshire

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
954-0430C
Replaced the drive belt
Did you find this story helpful?
Thank you for voting!

Snowblower no ground movement and weak auger rotation

Mark from AVON, Connecticut

1 person found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
954-0430C, 954-0346
Removed shroud metal to gain access to belts on top of and under the engine pulleys.
Removed belts.
Researched, found and ordered two belts.
Installed Belts.
Tested machine ground drive and auger movement. Test O.K.
Replaced shroud material.
Did you find this story helpful?
Thank you for voting!

Leaked oil

Terry from Greenwood, Indiana

1 of 2 people found this instruction helpful.
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Removed motor from frame and placed on bench.
Removed all pulleys.
Removed oil pan.
Removed cam and cam followers.
Removed carburetor and intake.
Cleaned crankcase and removed all old gasket material on block and oil pan.
Cleaned carburetor.
Cleaned cam and cam followers.
Replaced both cran k and cam oil seals.
Reinstalled cam followers.
Ensure piston at TDC in compression stroke.
Aligned timing marks on cam and crank.
Installed cam.
Spray oiled all internal components.
Installed oil pan using new gasket.
Installed carburetor using new intake gasket.
Replace spark plug.
Reinstalled pulleys.
Reinstalled motor to frame and installed new belts.
Filled with oil.
Primed.
Started first pull. No leaks.

Did you find this story helpful?
Thank you for voting!

old belt was wore out

Chris from Midland, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
954-0430C
hade to split it in half 6 bolts and remove the auger cable and replaced the old belts with the new ones
Did you find this story helpful?
Thank you for voting!

Snow blower

John from SMITHFIELD, Rhode Island

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Parts Used:
954-0430C, 954-0346
Check all the belts and start the machine and runs as new
Did you find this story helpful?
Thank you for voting!

Auger wouldn\'t spin

Skip from Keene, New Hampshire

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Socket set, Wrench set
Parts Used:
954-0430C
Dropped the auger cowling, took out old belts, replaced belts, reinstalled auger cowling, and started it. Very simple!!
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP16585463
Manufacturer Part Number: 954-0430C
Brand Model Number Description
MTD 10030 Snow Blower - Snow Blower
Cub Cadet 1028 Snow Blower - Gold Series Snowthrower
Cub Cadet 1130 Snow Blower - Swe Snow Thrower
Cub Cadet 1130SWE Snow Blower - Snow Thrower
Yard Man 13AE662E088 Snow Blower - Yard-Man Snowblower Model 13AE662E088 Parts
MTD 1619743 Snow Blower - MTD Snowblower Model 1619743 Parts
MTD 1652656 Snow Blower - MTD Snowblower Model 1652656 Parts
MTD 1652670 Snow Blower - MTD Snowblower Model 1652670 Parts
MTD 1683580 Snow Blower - MTD Snowblower Model 1683580 Parts
Craftsman 24742513 Snow Blower - Snowblower
Craftsman 247882690 Snow Blower - Snowblower
Craftsman 24788347 Snow Blower - Snowblower
Craftsman 247885500 Snow Blower - Snowblower
Craftsman 247885550 Snow Blower - Track Drive Snow Thrower
Craftsman 247885570 Snow Blower - Snowblower*
Craftsman 247885680 Snow Blower - Snowblower
Craftsman 247885690 Snow Blower - Snowblower
Craftsman 247886640 Snow Blower - Snowblower
Craftsman 247888160 Snow Blower - Snow Blower
Craftsman 247888500 Snow Blower - Snowblower
Craftsman 247888510 Snow Blower - Snowblower
Craftsman 247888520 Snow Blower - Snowblower
Craftsman 247888530 Snow Blower - Snow Thorwer
Craftsman 247888531 Snow Blower - Craftsman Snowblower Model 247.888531 (247888531, 247 888531) Parts
Craftsman 247888540 Snow Blower - Snowblower
Craftsman 247888550 Snow Blower - Snowblower
Craftsman 247888640 Snow Blower - Craftsman Snowblower Model 247.888640 (247888640, 247 888640) Parts
Craftsman 24788890 Snow Blower - Snowblower
Craftsman 247888900 Snow Blower - Snowblower
MTD 26274 Snow Blower - MTD Snowblower Model 26274/1996 Parts