unbolted the 2 bolts holding each end of the auger
unbolted the belt cover and removed it.
removed the auger directional crank handle.
removed the 4 large bolts holding the front auger housing.
removed the cable for the auger at the pulley
removed the auger belt
separated the two pieces, lifting the ho
... Read moreusing up a little to clear the notch and pins.
removed the large bolt and washer in the middle of the auger pulley
pulled auger and impeller assembly from auger housing, careful of the bearing in the middle for the shaft.
removed auger blades and bushing, spacers and washers as they were on the old auger assembly and reinstalled on new auger assembly
reinstalled everything in reverse, adjusted auger cable, all was as it should
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP11813272
Manufacturer Part Number: 918-04171C
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Transmission or Clutch","title":"Transmission or Clutch","url":"/parts/lawn-and-garden/snow-blower/transmissions-and-clutches/"},{"position":2,"name":"918-04171C","title":"918-04171C","url":""}]
