This sleeve is an OEM direct from DeWALT. Constructed of durable metal, the sleeve is compatible with several screwdriver devices. This part is fitted between the washer and spring in the nose cone, securing the anvil assembly. The sleeve is sold individually. A hex key may be necessary in the removal and replacement.
Video from ereplacement showed correct way to assemble.Dewalt diagram is confusing by not showing correct order of parts. Go to their main page and click on Repair Center. Then go to Type keywords. And type in How to Replace the Chuck on a DeWalt Impact Driver. Scroll down and you will find it.
Small straight blade screwdriver used to remove retaining ring, disassembled
parts in order, installed new parts suggested in reverse order and tool is like
brand new, took maybe ten minutes including sips of coffee. I already have
a list of parts for other tools that need some TLC, have told friends about your
si
... Read morete and they are impressed as well. Thank You Moe
1. Removed the retainer clip from the end of the quick release chuck, caution there is a spring underneath, so disassemble carefully.
2. Remove the quick release thumb sleeve.
3. Remove the collar below the thumb sleaze. The spring and bearing should stay in place.
4. There is a retaining clip below the collar. In my cas
... Read moree this was not in it\'s grove on the shaft.
5. Pull up on the shaft, while pushing down on the retaining clip below the lower collar to lock it in place.
6. Reassemble in reverse order.
Be careful if you take off the retaining clip there are free floating bearings under the washer that will fall out.
Replaced parts as seen in your video on your repair center on your site. Each part was easily installed. Thank you.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
