Part Location Diagram of 42-24-0015 Milwaukee Front Guide Roller Kit
See part B-134 in the diagram
Replacing your Milwaukee Saw Front Guide Roller Kit
( Grid squares measure 1x1 inch )

Front Guide Roller Kit 42-24-0015

Manufactured by:
Milwaukee
ERP Number:
ERP10128491
Part Number:
42-24-0015
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an authentic Milwaukee replacement part that is sourced from the original manufacturer to be used with portable band saws. The front roller guide is a complete replacement part assembly. This item attaches to the pulley support and is used to support the blade and to keep it on track. This item is priced as a single item.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Saw
  • Band Saw

Videos For installing this part.

?
Replacing your Front Guide Roller Kit

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Old parts were worn, rusted and some bearings were frozen.

LeRoy from Berthoud, Colorado

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
42-28-0025, 42-24-0015
Very simple. Remove blade. Unscrew 2 torx bolts on front guide roller, remove old unit, set new unit in place (it has a registration pin), reinsert two torx bolts and tighten. Repeat process with the rear roller. Reinstall blade. The blade guards remain in place because there is plenty of room to remove and install the roller units.
Did you find this story helpful?
Thank you for voting!

The saws are equipped with saw blade guides .... i.e. mini roller bearings. They were completely shot and needed to be replaced

Douglas from Madison, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
42-24-0015, 14-46-0465
Simply unscrew the old and install new ..... then test the saw for a straight cut with no binding.
Did you find this story helpful?
Thank you for voting!

Not cutting straight.

Mark from Goldthwaite, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
42-28-0025, 42-24-0015
Removed blade. Removed large plastic covers for both drive idler wheels. Turned saw upside down and placed in vise. Removed screws for front and rear rollers. Removed and discarded rollers and screw. Installed new rollers with new screws. Re- installed wheel covers and blade. My saw works like new again.
Did you find this story helpful?
Thank you for voting!

The band saw would start run & then would bind up on metals

Eleazar from Edinburg, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Removed the worn tires from the wheels
Placed the new tires around the wheels
Removed both the front and rear guides rollers
Installed the front and rear blade roller kit
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10128491
Manufacturer Part Number: 42-24-0015
Brand Model Number Description
Milwaukee 2729-20 Band Saw - M18 Fuel Deep Cut Bandsaw
Milwaukee 2729-21 Band Saw - M18 Fuel Deep Cut Bandsaw
Milwaukee 2729-22 Band Saw - M18 Fuel Deep Cut Bandsaw
Milwaukee 2729S-20 Band Saw - M18 Fuel Deep Cut Bandsaw W/Two Hand
Milwaukee 6232-20 Band Saw - Deep Cut Bandsaw
Milwaukee 6232-21 Saw - Milwaukee 6232-21-(D51b) Parts
Milwaukee 6238-20 Band Saw - Deep Cut AC/DC Bandsaw
Milwaukee 6238-21 Saw - Milwaukee 6238-21-(D52b) Parts