This is a Genuine OEM sourced replacement part designed for use with Makita Compound Miter Saws. It connects to the Arm and it is used to lock the blade into the down position for storage or transportation. This item is made out of Metal and it is Sold Individually.
Remove the blade guard retaining screw
Remove allen set screw from saw frame
Drive out 3\'\' long retaining pin,separate blade housing from body of saw. At this point the large spring that tensions the blade pivot will go flying.
Installing the new stopper pin is easy.Re-installing the spring is a real struggle and the i
... Read morenternet was of no help. After a few failed attempts I placed the spring in a vise secured it with a hd zip tie and removed it from the vise.
Now the fun part.You have to re-install the spring and at the same time re-install the retaining pin.I was able to do it by myself, but I strongly recommend the help of another person. Finally cut the zip tie and remove the pieces and you are done.
Read less
Did you find this story helpful?
Thank you for voting!
Many parts were damaged or missing due to over 10 years of professional use.
Replaced the power cord and the work light. Replaced the pin that holds the saw in the closed position. Also replaced a few other misc parts. The light, power cord and pin were the biggest reasons I needed to repair just due to safety and ease of use. The pin was the hardest part to replace because I had to remove the large pivot pin
... Read morethat the entire saw hinges on by tapping it out with a mallet and a 1/2\" socket extension. The spring that holds the saw in the up position comes out when the hinge pin is removed making it extremely difficult to put everything back together. I realized after the fact that there are holes just below the spring that you can insert a screw driver or Allen wrench or similar object which holds the spring in the closed position. I still haven\'t figured out if there is an easier way to replace the spring itself since you obviously can\'t hold it in the closed position if you are trying to replace it, but my spring is fine and I don\'t have to worry about that now. There were no websites or videos that I could find to show how this is done, but I figured it out. Would have been easier if there was something that explained the holes for holding the spring before I took it all apart and the spring ejected the saw arm.
Removed main pivot bolt, drove out bushing with drive pin to match size, removed saw from cutting deck, removed broken pin, installed new pin with rubber o-ring that was not included had to buy that at a hardware store, positioned saw to deck by compressing spring and lining up bores, drove bushing back in and reinstalled main pivot bolt
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10147298
Manufacturer Part Number: 322317-4
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
