This is a genuine Makita dust bag which fits various miter saws. It is a complete assembly, including the cloth bag, release clip, and inlet tube. The dust bag is compatible with the Makita tools listed below, but will not fit any other power tools. Requires p/n 213460-9 and p/n 414568-4, for installation.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Excedllent customer service.
Ordered dust bag for old Makita chop saw and received item within two days. I was impressed when I called and actually got a person to speak too. I know I will order order parts as I need them from this place.
Guest - June 1, 2019
Verified Purchase
★★★★★
★★★★★
Fast, easy, affordable and the part fit my tool perfectly.
I will say it again: arrived fast, was packaged proper, easy to order and pay for, affordable and perfectly fit my tool. Great experience!
Guest - August 29, 2019
Verified Purchase
★★★★★
★★★★★
worked as excepted
fit perfect
David - June 30, 2020
Verified Purchase
★★★★★
★★★★★
The part I needed
Needed the dust bag for my Mikita miter saw. Had trouble finding it so I went back ereplcementparts. Found it using the diagrams. Ordered it, got it in a few days, fit just right. I can usually find what I need here without a problem. Great web site.
Guest - September 21, 2020
Verified Purchase
★★★★★
★★★★★
Perfect match
This is a perfect fit thanks
Guest - January 15, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed blade.
2. Removed fence, (4 bolts).
3. Removed rotating plate screw.
4. Lifted out rotating plate and motor assembly.
5. Was careful NOT to loose indexing bearing. WATCH OUT FOR THAT!
6. Removed and replaced three slide bushings.
7. Lubed and reassembled.
Remove handle half, take note of where all the internal part are. Remove cord clamp. Disconnect cord from switch. Remove the cord relief and slid it on the new cord. Connect the new cord to the switch. Install cord clamp. Assemble handle assembly.
Put new bag on dust nozzle.
Did you find this story helpful?
Thank you for voting!
Makita LS1011 Compound Miter Saw dust bag needed replacement
I purchased the correct replacement parts from eReplacementParts. I\'ve had this Makita saw since the 90s and used it to replace all the base moulding in my house. 20 years later I pulled it out to use it and found the dust bag was torn. Makita had discontinued the original bag with a superseded PN that didn\'t fit the original plastic el
... Read morebow. I thought I was going to have to buy a new Makita Compound Miter saw. Then recently I found on the Makita website eReplacementParts had the replacement bag, plastic elbow and o-ring for my 20 year old saw. I\'ve been so happy I found these parts -- so I bought a lifetime supply. Thank you eReplacementParts. You saved me $700!
Removed main pivot bolt, drove out bushing with drive pin to match size, removed saw from cutting deck, removed broken pin, installed new pin with rubber o-ring that was not included had to buy that at a hardware store, positioned saw to deck by compressing spring and lining up bores, drove bushing back in and reinstalled main pivot bolt
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
