It is an original manufacturer supplied replacement item and is sold individually. This ball bearing is sealed on both sides. Ball bearings are made to reduce friction between two rotating parts. Because they experience constant pressure they would need to be checked and replaced periodically to ensure top performance. Please check diagrams for correct location and application of this bearing.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Prefect Fit
My bearing broke in my sander and I found one on replacenentparts.com and they got it to me fast and quick. Was exactly what I needed to fix my sander.
Thanks
Guest - May 13, 2019
Verified Purchase
★★★★★
★★★★★
Very simple
Everything was a perfect fit and I had it back together and running in about 15 minutes
Guest - September 14, 2019
Verified Purchase
★★★★★
★★★★★
Easy web site to work with
Fast shipping and item as expected! Thank you.
Guest - November 7, 2019
Verified Purchase
★★★★★
★★★★★
Great Replacement
The parts I ordered were exactly the correct replacement for my Ryobi sander.
Daniel - November 28, 2019
Verified Purchase
★★★★★
★★★★★
Palm Sander Repair
I ordered two Platen Assembly and three (6000LU) Ball Bearings. Instead of purchasing a new sander this time, I ordered the parts and fixed all three of my sanders within (30) minutes. Fast service - Great Price - Excellent quality - Great job guys!
Kelly - January 11, 2020
Verified Purchase
★★★★★
★★★★★
Excellent parts fit perfectly. Now i can get back to work. Will definitely be a repeat customer.
Thank you.
Guest - December 14, 2021
Verified Purchase
★★★★★
★★★★★
Great service
Part was perfect. Great service and quick shipping
Michael - August 9, 2025
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Completely disassembled unit. Installed new bearings on new motor shaft using gentle taps with a hammer. Added extra grease to bearings. Replaced brushes. Grease all gears. Reassembled saw. Taking care to align laser.
Remove 4 screws from the old pad and platen and remove. Remove the worn bearing and collar from the fan. Install new collar and bearing, replaced the dust shield. Then installed the new platen and pad.
1. Removed 4 screws holding sanding pad to base.
2. Removed old parts.
3. Installed new collar, bearing and dust seal.
4. Reinstalled sanding pad making sure to align pad to base.
5. Installed & tightened the 4 screws.
6. Plugged in sander and tested it\'s operation.
7. It worked fine, Job complete.
Did you find this story helpful?
Thank you for voting!
Backer pad bearing that causes oscillation disintegrated.
1. Removed foam pad and backer screws. Removed inner bearing race from motor shaft. 3.Installed new OEM bearing. 4. Re-installed backer plate, foam pad and six screws. 5.Tested sander and it ran like new. Note : If inner bearing race doesn\'t lift off, a bearing puller might be needed.
Ryobi - remove screws holding bottom plate and replace bearing and dust shield.
Makita - remove screws holding bottom plate. Important - remove screw on each side of plastic piece that centers the motor. Remove the 4 screws that hold the two housing halves together. Unscrew switch terminals to remove wires and insert wires
... Read more into new switch. On mine, I had to repair the insulation on one of the wires pinched by the housing. If you need to replace the brushes, this would be a good time. Reassemble.
Read less
Did you find this story helpful?
Thank you for voting!
The main bearing had disintegrated and the platen was no longer holding sandpaper properly.
1. With a #2 JIS (Japanese Industrial Standard) phillips screwdriver, remove and save the four long screws that secure the platen assembly to the housing.
2. Carefully remove the platen assembly from the housing.
3. Remove and discard the old bearing and any bearing fragments from the housing . Blow out any small fragments an
... Read mored dust with compressed air.
4. Install the new bearing on main drive shaft.
5. Align the the screw holes in the new platen assembly with the housing and carefully seat the new platen over the bearing.
6. Replace the four long screws to secure the new platen assembly to the housing.
Note: If a platen assembly is ordered, you do not need to order a the dust shield for the bearing as it is included in the new platen assembly. However, if the platen assembly is not being replaced, then a dust shield should be ordered when replacing the bearing.
Removed backing plate from bottom of sander and that exposed the bottom of the motor and the pieces of the failed bearing. Removed the pieces and replaced with the new bearing. No problem
R & R sanding plate containing bearing by removing four (4) mounting screws. Removed worn bearing by carefully prying it from its installed position within sanding plate; installed new bearing by carefully pressing it into place.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
