This is a genuine manufacturer sourced replacement sanding disk designed for use with Ridgid random orbit sander. It is a six (6) inch hook and loop fastening eighty (80) grit sandpaper. This disc is sold individually. To attach hook and loop sanding disc: • Unplug the sander • Align the holes in the sanding disc with the holes of the backing pad • Press the sanding disc against the backing pad firmly • To provide for the best adhesion, it is advised to clean the backing pad and the sanding disc backing occasionally by brushing them lightly with a small brush
Troubleshooting
This part works with the following brands:
Ridgid
This part works with the following products:
Sander Polisher
Sander Grinder
Part# 901058001 replaces these:
901058001,
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
Less than 15 mins
(1 rated repair)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The rubber pad was torn loose off the plastic backer that is mounted to the sander drive
Selected the correct size torx bit to fit the 4 screws
Used a cordless drill driver to loosen the 4 screws
Removed the plastic backer that was still on the sander
Aligned the new pad screw holes on the drive head of the sander
Hand start all 4 screws
Use the cordless drill to re-torque the screws using a sta
... Read morer tightening pattern
Test start the sander
Attach a new sanding disc then it was ready to use again
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18704953
Manufacturer Part Number: 901058001
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
