Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Useful part
Part fits perfectly. It arrived quickly. Nice people to do business with. Glad you have such a wide range of parts available!
Alex - May 8, 2019
Verified Purchase
★★★★★
★★★★★
these went in perfectly
what do you say about brushes - I got these with some other parts to fix up my trusty Makita corded Gà£" drill - all the parts, including these brushes, fit perfectly - the whole operation took maybe 15 minutes and the drill works like new - so much better to fix good tools than to throw them away and replace them - I feel like I'll get an other 30 years out of this drill - if I last that long myself - otherwise the kids will insert them along with tools from MY grandfather - and they will all be working.
Guest - May 14, 2019
Verified Purchase
★★★★★
★★★★★
Quick repair - fit perfectly.
Disk sander like new.
Guest - June 22, 2019
Verified Purchase
★★★★★
★★★★★
great product
Fit well worked great
Guest - August 19, 2019
Verified Purchase
★★★★★
★★★★★
Advice better than part
The excellent advice was better than the part. Problem solved
Guest - October 4, 2019
Verified Purchase
★★★★★
★★★★★
great service
great service
Guest - December 12, 2019
Verified Purchase
★★★★★
★★★★★
Makita sander and porter cable sander brushes
Both tools are back and running. You sent the correct parts and it was an easy fix . Thank you.
Guest - February 24, 2020
Verified Purchase
★★★★★
★★★★★
brushes
delivered on time
Guest - March 9, 2020
Verified Purchase
★★★★★
★★★★★
Perfect
On time
Fit
Back in business
Guest - March 10, 2020
Verified Purchase
★★★★★
★★★★★
Matched exactly
Arrived quickly,and fit perfectly
Guest - January 7, 2021
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed handle cover, Then I removed the brush holders and removed the worn brushes. Then I installed the new brushes in the holders and installed the brush holders in the housing. Then I replaced the handle cover. Brushes purchased fit perfectly and job was completely successfully in less than 30 minutes. I received the parts in a very t
... Read moreimely manner.
Read less
Did you find this story helpful?
Thank you for voting!
Broken brush; motor wouldn\'t turn or would turn slowly.
Makita palm sander; Took a little figuring to get it apart; had to pry the bearing out of the sanding pad. Need to be sure all the screws are taken out before pulling it apart. Brushes went in fine.
1. Removed the 4 screws that held the pad on
2. Removed the torx head screws that held the case together.
3. Pulled the case apart and replaced all the bearings and motor brushes, as well as the broken feet.
4. Assembled in reverse steps.
Remove the screws from the handle cover, remove the brush holders and brushes. Install the new brushes into the new holders and install them in the housing. Then screw the handle cover back on.
Did you find this story helpful?
Thank you for voting!
Broken sanding pad, also replaced brushes when I had it apart.
Remove the screws from the housing, separated housing. Remove the worn brushes from the brush holders and replaced them with the new brushes, installed brushes and brush holders and assembled housing. I then installed the new pad and washer.
Removed plate and split case. Slid the broken feet out and slid new feet into place. I replaced the brushes since I had split the housing and had easy access to them. Made sure wires were properly routed and retained before re-assembling and blew out sanding dust. Case screws are different lengths but are NOT easily mixed up. Nothing tri
... Read morecky about the repair and parts fit perfectly.
Read less
Did you find this story helpful?
Thank you for voting!
Bearing was bad on Makita BO4510 sander purchased at a yard sale
1. Dismantled sander to determine which bearing was bad.
2. Found the bottom motor bearing was bad
3. Removed the armature and used a small gear puller to remove the bad bearing
4. Pressed the replacement bearing in the shaft using a deep socket and hammer
5. Removed the seals on the remaining bearings and re-packe
... Read mored them with low viscosity grease
6. Replaced worn brushes
7. Reassembled the sander and tested it.
8. Now I have a sander that runs like new.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10156669
Manufacturer Part Number: CB75
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
