This trigger type switch has 4 terminals and a locking mechanism. This genuine Makita replacement part is sold individually. Switches are commonly replaced parts in power tools. A switch handles on/off and variable speed functions. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Some common signs of a broken or failing switch are: • The tool has completely stopped functioning - it will not turn on. • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't turn on at all. • The variable speed function and electric braking aren't working properly.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Work great
Good fit saved
Guest - April 26, 2019
Verified Purchase
★★★★★
★★★★★
Repaired and working as exspected
All parts order for my Makita Planner arrived in good condition, installed and put it back to work, ereplacement Parts makes it real easy to make sure you are ordering the right parts by showing diagrams of most tools.
Donald - November 1, 2019
Verified Purchase
★★★★★
★★★★★
Awesome service!
Came quickly and was the correct part!
Guest - April 3, 2020
Verified Purchase
★★★★★
★★★★★
The exact original part
The part got here quickly and it was exactly as it was described. It got my makita power tool working like new again thanks.
Guest - May 19, 2020
Verified Purchase
★★★★★
★★★★★
Replaced trigger switch on grinder.
Part arrived quickly. Exact replacement. Took a bit to move the wires around in a tight space to get the handle back on but it saved a 20 year old tool.
They rarely make great tools like that anymore.
Guest - March 22, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed the exterior case. Removed the four wires from the trigger. Ordered the trigger (switch) for $10.00 and replaced it. Piece of cake. All I needed was a Phillips screwdriver.
Removed the handle cover
Removed the cord clamp
Made a wiring diagram
Disconnected the wires from the switch
Connected the wires to the new switch
Installed the switch
Screwed in the cord clamp
Screwed the handle cover on
Did you find this story helpful?
Thank you for voting!
Switch was intermittent and power cord was old and tired
I opened the handle by removing 3 screws. The replacement trigger fit right into the handle; it needed 2 ring lug terminals soldered onto the new power cord and connected where the old power cord was. The new cord was already stripped properly, the conductors each needed to be shortened 1-1/2GÇ¥ or so and then clamped under the handlesGÇÖ
... Read more built-in strain-relief. The rubber cord guard fit into its built-in nest. The handle parts provide well designed nests and wire guides so carefully replacing the handle half will provide clamping action for the cord guard. The switch fits right in and is well secured. Replacing the handle half and tightening the 3 screws completes the job. There were no printed instructions provided and the 2 replacement electrical wire terminals were not supplied, but any normal human would have no difficulties as the assembly is quite clear and the terminals are available almost everywhere ... I enjoyed this easy little repair project and now my little belt sander works great again, and the replacement power cord is more robust than the original. Ereplacement Parts was easy to use and the employee I spoke with was very knowledgeable and nice to deal with.
Remove the handle cover and the cord clamp
Make a wiring diagram
Removed the wires from the old switch
Connect the wires to the new switch
Screw in the cord clamp
Screw the handle cover on
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10153586
Manufacturer Part Number: 651232-8
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
