Genuine Black and Decker replacement part. This item is sold individually. The Finger Platen is used on the sanders listed below. It is used for sanding into smaller corners and other also it can reach further into a corner. To install this part simply remove the Carrier part number 582097-00.
Troubleshooting
This part works with the following brands:
Black and Decker
Craftsman
This part works with the following products:
Sander Polisher
Part# 582146-01 replaces these:
582146-01, P582146-01,
★
Customer Part Reviews
?
4.4
Average Rating (out of 5):
★★★★★
★★★★★
(13 Reviews)
Click to filter by ratings:
5 stars
11
4 stars
0
3 stars
0
2 stars
0
1 star
2
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
lost this piece.....needed to replace it.
Arrived in great condition. Need this piece, for my furniture restoration projects.
Francis - January 17, 2020
Verified Purchase
★★★★★
★★★★★
Easy to order and delivery was fast
Just what I needed to repair my sander
Guest - January 22, 2020
Verified Purchase
★★★★★
★★★★★
Worked like new.
Worked like new.
Guest - March 24, 2020
Verified Purchase
★★★★★
★★★★★
Quality parts at a good price
Top-quality parts at a competitive price. Shipped quickly which was a leading thanks again
Guest - April 13, 2020
Verified Purchase
★★★★★
★★★★★
Product as described. Fast shipping.
I really can't believe how fast these people are even in these difficult pandemic times. Great knowledgeable people and the product is exactly what I was looking for. Thank you.
Guest - June 12, 2020
Verified Purchase
★★★★★
★★★★★
EASY SWAP
First rate parts ,great price and people that are easy to work with, great communications on status and delivery.
Guest - May 12, 2021
Verified Purchase
★★★★★
★★★★★
Perfect replacement
Received part quickly
Guest - August 15, 2019
Verified Purchase
★★★★★
★★★★★
Sander parts
It was so easy to find the needed parts. They came quickly. Very pleased.
Guest - November 13, 2019
Verified Purchase
★★★★★
★★★★★
Works perfect for what I needed it for
I am so happy that I found this web site. Shipping was fast. I will use it again
Guest - April 19, 2022
Verified Purchase
★★★★★
★★★★★
Not really a repair.
This was not really a repair but just replacing a part. It was easy as you install it when you need it.
Guest - May 10, 2022
Verified Purchase
< Prev
1
2
Next >
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
Less than 15 mins
(13 rated repairs)?
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The parts I purchased were needed to replace a worn out Finger Platen and Carrier. The screw was just in case I dropped one and couldn\'t find it. The Pad Tip and Contouring Head were missing when I acquired the sander. The sandpaper was for replenishing my supply. This repair was easy since it took only one screw to complete the job.
Remove the 5 Screws on the bottom pad of my Black & Decker mouse sander
take the whole mouse pad put it in a vice then take a razor blade and cut off the pad the old melt the pad and use the alcohol to get some of the Adhesives off. Give it a light sanding scuffing up the plastic so that the new pad will stick. Put the pad back
... Read more on the sanding plate on the bottom of the sander put the screws back on and voila took about a total of maybe 10 minutes
Just put new part in. Got a B/D sander and it was missing a piece. So I got Extra parts so I have them in the future as long as I was paying the costly shipping price for the ONE piece! EASY repair!!! EVEN an OLD LADY LOL could do that one!!! Just put on the new part that I ordered. Ordered extra parts so should the others break or I lose
... Read more them, I will have them for future use!!! SIMPLE REPAIR! Doesn\'t take the brains of a rocket scientist to do that one!!!
Read less
Did you find this story helpful?
Thank you for voting!
Missing Finger Platen apparently I miss placed it.
Remove screws that connect the right and left sides of the sander.
Separate sides and remove old platen.
Remove stand-off supports and place them on the new platen.
Reattach right and left sides of sander with screws.
Attach finger platen with screw
1. Used Allen wrench to remove prematurely failed platen assembly
2. Used screw driver to pry failed platen assembly from sander
3. Aligned and installed new platen assembly onto sander
4. Installed screws and tightened slowly and evenly to assure new platen was held firmly in place.
5. Returned sander to work with
... Read more no platen failure on work previously attempted.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 582146-01 DeWALT FINGER PLATEN")
_WW_1.gif "Part Location Diagram of 582146-01 DeWALT FINGER PLATEN")
