This is a Genuine OEM sourced replacement part designed for use with Sanders/Polishers. This Carrier fits in the front Tip of the Platen. It is made out of Plastic and it is Sold Individually. To replace this Carrier you would need a Screwdriver. • Remove the Screw that secures the Carrier • Remove the old Carrier and replace it with the new one • Attach new Carrier using the Screw
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Palm Sander
The item I ordered, the very tip of my Palm Sander, arrived in perfect condition, in a timely manner, and best of all, it was exactly why I wanted. Took 2 seconds to place on sander and off I went. Thanks so much.
Debra - June 11, 2019
Verified Purchase
★★★★★
★★★★★
The part was what I requested.
Fit exactly to the sander. Very satisfied.
Guest - March 17, 2023
Verified Purchase
★★★★★
★★★★★
Parts were great, however it sat in warehouse 3 days before shipping.
Parts did not ship in time promised. Parts were what I needed, however, because of the delay in shipping I had to go buy a more expensive replacement part at my local hardware store for my sander so I could get my job done on time for my customer.
Terri - April 29, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
The parts I purchased were needed to replace a worn out Finger Platen and Carrier. The screw was just in case I dropped one and couldn\'t find it. The Pad Tip and Contouring Head were missing when I acquired the sander. The sandpaper was for replenishing my supply. This repair was easy since it took only one screw to complete the job.
Remove the 5 Screws on the bottom pad of my Black & Decker mouse sander
take the whole mouse pad put it in a vice then take a razor blade and cut off the pad the old melt the pad and use the alcohol to get some of the Adhesives off. Give it a light sanding scuffing up the plastic so that the new pad will stick. Put the pad back
... Read more on the sanding plate on the bottom of the sander put the screws back on and voila took about a total of maybe 10 minutes
Just put new part in. Got a B/D sander and it was missing a piece. So I got Extra parts so I have them in the future as long as I was paying the costly shipping price for the ONE piece! EASY repair!!! EVEN an OLD LADY LOL could do that one!!! Just put on the new part that I ordered. Ordered extra parts so should the others break or I lose
... Read more them, I will have them for future use!!! SIMPLE REPAIR! Doesn\'t take the brains of a rocket scientist to do that one!!!
Read less
Did you find this story helpful?
Thank you for voting!
Parts got lost when working with grandson. Now the sanders are good as new. Thank you
Opened up the sander and removed the old switch - super easy to do.
Tested the old switch with a multimeter - bad.
While waiting on the new switch, completely took apart the sander and cleaned it out.
Installed the new switch and reassembled the sander.
The purchase of the carrier was a mistake, I meant to order a
... Read morepad tip, but I was careless and didnGÇÖt notice my mistake until it was too late.
Grabbed a screwdriver, removed parts from package, laid carrier on the base, inserted screw and tightened with screwdriver. Took longer to type this! Great service, prices and delivery
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
