Remove the bandsaw blade per manufactures instructions. Remove the band saw table by removing the two knobs securing the table to the trunions from underneath. Lift off table and put aside. Remove the two nuts securing the old lower bracket to the frame of the saw. transfer the bearing and guide block assemblies from broken bracket to t
... Read morehe new one; (they only fit in where they belong so impossible to mix up). Install new bracket onto frame of saw, reinstall the table and blade, tension it, adjust bearing so it almost touches the back of the blade, adjust guide blocks so they are just behind the teeth of the blade and and spaced the thickness of a dollar bill between blade side and blocks, tighten everything up and you\'re done. Happy woodworking
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19125545
Manufacturer Part Number: JT9-150055
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Bracket or Flange","title":"Bracket or Flange","url":"/parts/power-tool/sander-grinder/brackets-and-flanges/"},{"position":2,"name":"JT9-150055","title":"JT9-150055","url":""}]
_WW_1.gif "Part Location Diagram of JT9-150055 Jet LOWER SUPPORT BRACKET POST")
_WW_1.gif "Part Location Diagram of JT9-150055 Jet LOWER SUPPORT BRACKET POST")
