This cord is a genuine Porter Cable replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 18 Gauge • 7 Feet Long • Porter Cable models: 6302 T4, 6902 T5, T6
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
A GoTo place for hard tomfind parts
Thanks for being a great source for keeping my “antique tools” in good,safe working order!
Guest - July 10, 2019
Verified Purchase
★★★★★
★★★★★
It was the correct power cord and it made install easy
Part was new and correct length
Glen - July 24, 2019
Verified Purchase
★★★★★
★★★★★
Exactly what I needed
I have used e replacement parts several times now. My orders always arrive quickly and work as expected. When I need a part I check you first.
Guest - August 26, 2019
Verified Purchase
★★★★★
★★★★★
Quality Product Ease of Installation
All parts received where excellent quality and fit was spot on. Repair went without a hitch and power tool is like new.
Guest - September 17, 2019
Verified Purchase
★★★★★
★★★★★
Power Cord Replacement
Arrived relatively fast and exact replacement for original power cord. Belt sander back up and running. Thanks!
Guest - June 4, 2020
Verified Purchase
★★★★★
★★★★★
Building Trades Mr. Fixit
I volunteer at a local high school with the Building Trades class. As you can imagine the kids are pretty tough on tools. I kinda have taken on the role of Mr. Fixit for the teacher. That being said, when I need specific parts for repair of a tool, I need it quick and accurate the first time. I've used Repair Parts several time now and they haven't let me down yet. Good replacement parts, fair price and on time delivery. What more can I say.
Andy - September 30, 2021
Verified Purchase
★★★★★
★★★★★
Easy fix saved a lot by not having to buy a new sander
New cord was all my Porter Cable sander needed.
Guest - October 2, 2024
Verified Purchase
★★★★★
★★★★★
Parts fit and I have had no problem with sander. Delivery was very quick.
Parts fit and I have had no problem with sander. Delivery was very quick.
Guest - July 10, 2019
Verified Purchase
★★★★★
★★★★★
A good product. I'm satisfied.
Easy repair. Pretty good shipping, but shipping was way too expensive.
Michael - October 7, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Took top of sander off by removing 4 screws. (Rockwell sander, now Porter-Cable)
2. Removed old power cord and sleeve by untwisting two wire nuts and unscrewing bolt connecting green ground wire to handle.
3. Inserted new power cord though sleeve, stripped insulation off end of all three wires.
4. Connected new power
... Read morecord to sander using the same two wire nuts, black to black and white to white. Then connect green ground wire to sander handle using same bolt.
5. Replaced top of sander and tightened it down to secure power cord and sleeve. Works Great!
( Make sure sander is unplugged before attempting repair.)
Removed the trigger handle - 6 screws
disconnect the power cord
Remove end clips from old power cord
install end clips on new power cord
cut green ground wire - not needed
Install new cord to saw
Install trigger handle
Done
I removed the top half of the housing, replaced the cord and sleeve. Then removed the old pad and cleaned the surface. I put a small piece of very thin metal duct tape over the bearing hole. Then I sprayed a light coat of 3M high tack adhesive on the pad and reinstalled it....Job done!!
Removed half the handle. Removed the switch from the handle. Extracted the wires from the switch and unconnected the ground wire. Cut white wire and trimmed replacement wires from new power cord to length. Tinned the black wire on replacement cord and then reattached cords and handle.
I removed the top half of the motor housing. I disconnected the cord from the tool and made a wiring diagram of where the wires were connected. I took off the cord relief and put on the new cord. Trimmed the wires to the correct length needed. Connected the new cord. Made sure no wires would get pinched when I put the housing back on. The
... Read moren put the housing back on.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12502150
Manufacturer Part Number: 879182
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
