Replaced both upper and lower bearings. Remove top cap (2 screws) with 2.5mm hex key. Pull speed adjust by pulling back out of retainer. Remove brushes, I used a bent paper clip to pull the spring retainers back. Next remove 2 PH screws holding the top assembly to the windings. Pull off the top assembly. Remove the bottom bearing retaini
... Read moreng screws(2). Remove the shaft nut on the armature. At this point the armature can be pulled from the housing. Simply remove/replace the bearings. Reverse to re-assemble. You really don\'t need pullers but small bearing pullers are cheap. If you replace bearings on any power tool its worth the $12. for a puller.
Removed top cover (4 screws).
Removed brushes (2 screws on each brush holder).
Removed plunge base.
Removed nut on lower shaft (recessed in bottom of housing).
Removed upper and lower bearings.
Replaced bearings and re-assembled.
Removed Top Bearing cover and pulled brush springs and brushes from commutator. Disassembled lower lock nut after removing lower slide and height adjustment assembly. Care should be taken when removing lower plate as plunge spring has a tiny ball at the top and is easily lost. Remove lower bearing cover after removing bearing lock nut. Ta
... Read moreking care of the small parts and brushes. Removed armature from housing. Removed bearings and replaced same. Polished the commutator in a lathe while the armature was out of the housing. Reassembled the same. Router runs great again for a 15 year old.
1.Disassembled the router to access the bearing.
2.Clamped the locking plier to the bearing.
3.Placed the screwdriver on the bearing and began hitting the handle of the driver to remove the bearing from the shaft.
4.Replaced the new bearing by using a socket that matched the inside race and hit it until it was seated on
... Read morethe bore.
5.Put the unit back together, plugged it in fired it up.
6.It works.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19516047
Manufacturer Part Number: 3600905513
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
