Part Location Diagram of 31-52-0090 Milwaukee Shoe Release Lever
See part 28 in the diagram
( Grid squares measure 1x1 inch )

Shoe Release Lever 31-52-0090

Manufactured by:
Milwaukee
ERP Number:
ERP10126092
Part Number:
31-52-0090
Original Equipment Manufacturer ?
  Works with your model  6538-21!
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(5 rated repairs) ?
  Works with your model   6538-21!

Product Description

?

Genuine Milwaukee replacement part, this item is sold individually. The shoe can be adjusted forward or backward to take advantage of the unused portion of the blade or for special jobs requiring low blade clearance. To adjust the shoe, pull out the shoe release lever 1/4 turn. Slide the shoe forward or backward to the desired position. After adjusting the shoe, slowly pull the trigger to be sure the blade always extends beyond the shoe and your work throughout the stroke.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Reciprocating Saw
  • Saw

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
  • 5 stars
    4
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Ask our experts a question about this part and we'll get back to you as soon as possible!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Model number 652021 need shoe release
Michael For model number B02d612401148 - September 16, 2022

Hello Michael, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number:31-52-0090. Thank you for your inquiry, good luck with this repair!

eReplacementParts Team
September 16, 2022

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bought tool and parts were missing

Coy from Tracy City, Tennessee

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
I bought a recip saw and there were some parts missing from the nose. The hardest part was removing the rubber boot so I could install the Shoe Retainer. Once the boot was off it only takes one screw to install the retainer. Then I wrestled the boot back in place. The shoe pin is inserted through the hole on the front of the saw. Line up the D-shape of the shoe pin with the release lever and snap the lever onto the pin. Insert the shoe into the front of the saw and lock the lever. Simple!
Did you find this story helpful?
Thank you for voting!

Pin for release lever was lost.

Terry from EastBethel, Minnesota

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Installed the new pin in the new shoe release lever. Followed the installation instructions that were included with the Quik-Lok Blade Clamp. Then I slid the new shoe assembly in and locked it down.
Did you find this story helpful?
Thank you for voting!

Shoe lever and pin fell out and got lost.

Chris from Rancho Palos Verdes , California

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
First of all this was used to fix my orbital sawzall, but that selection was not available. My sawzall was missing the screw( perhaps supposed to be two???), retainer pin, and handle.

1. Use some silicone spray or WD-40 and spray under the protective boot. This makes it easy to peak off. Remove it.
2. Place the retain er and using a T-20 or flat headed screw driver secure it with the new screw.
3. Reinstall the boot.
4. Install the shoe into the retainer.
5. Insert the pin.
6. Pry the handle over the pin. One side of the pin is flat, so it\'ll only go on one way.
7. Done.
Did you find this story helpful?
Thank you for voting!

Shoe ass\'y broke in half

jerry from newfoundland, New Jersey

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Removed screws and replaced shoe
Did you find this story helpful?
Thank you for voting!

Pin-Shoe lost

Tomasz from STATEN ISLAND, New York

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
44-60-1635, 31-52-0090
Attached shoe release lever and pushed pin into it. Easy 1 minute job.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10126092
Manufacturer Part Number: 31-52-0090
Brand Model Number Description
Milwaukee 0719-20 Reciprocating Saw - V28 Sawzall Reciprocating Saw
Milwaukee 0719-22 Reciprocating Saw - Cordless Sawzall
Milwaukee 0719-50 Saw - Milwaukee 0719-50-(A56a) Parts
Milwaukee 0819-50 Reciprocating Saw - Cordless Sawzall
Milwaukee 6515-20 Reciprocating Saw - 18 Volt Sawzall Recip Saw
Milwaukee 6515-50 Reciprocating Saw - Cordless Sawzall
Milwaukee 6519-22 Reciprocating Saw - Sawzall
Milwaukee 6520-21 Reciprocating Saw - 12 Amp Orbital Sawzall Recip Saw
Milwaukee 6523-21 Reciprocating Saw - Sawzall
Milwaukee 6523-51 Reciprocating Saw - 230v Rotating Orbital Sawzall
Milwaukee 6523-55 Saw - Milwaukee 6523-55-(A75a) Parts
Milwaukee 6536-21 Reciprocating Saw - 1-1/4" Stroke Sawzall
Milwaukee 6536-51 Saw - Milwaukee 6536-51-(A66a) Parts
Milwaukee 6536-68 Saw - Milwaukee 6536-68-(Sbs 1300 Ves) Parts
Milwaukee 6537-51 Saw - Milwaukee 6537-51-(Sspe 1300 Sx) Parts
Milwaukee 6537-55 Saw - Milwaukee 6537-55-(Sspe 1300 Sx) Parts
Milwaukee 6538-21 Reciprocating Saw - 1-1/4" Stroke Sawzall
Milwaukee 6538-51 Reciprocating Saw - Emea 15 Amp Super Sawzall
Milwaukee 6538-55 Reciprocating Saw - Uk 110v 15 Amp Super Sawzall