Ridgid Table Saw Parts
We sell only genuine OEM Ridgid ® parts.
Top Ridgid Table Saw Models
-
Ridgid R4513 Table Saw Parts
-
Ridgid R4512 10 Inch Table Saw Parts
-
Ridgid R4092 10" Table Saw Parts
-
Ridgid R4516 Table Saw Parts
-
Ridgid R45171 Table Saw 7-26-18 (Rev:05) Parts
-
Ridgid TS3660 10" Table Top Saw Table Saw Parts
-
Ridgid TS3650 10" Table Saw Parts
-
Ridgid TS24000 10" Table Top Table Saw Parts
Popular Ridgid Table Saw Parts
- Manufacturer Part Number:
- 089240028003
Elevation Lock
- Manufacturer Part Number:
- 089290001053
This is an authentic Ridgid item that is supplied directly from the original manufacturer. It is designed for use with table saws. A washer is a special part which helps to provide a tight fit between connected components. This part provides an identical replacement for a damaged or a missing hardware that was installed on a new unit. Make sure to check the appropriate diagrams for your specific m...
- Manufacturer Part Number:
- 0502025007
This is a Genuine Manufacturer Sourced replacement part. This is a Carbon Brush with Lead Wire attached and a Spring. This Brush is Sold Individually. Please note Brush Holder is Sold Separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eve...
- Manufacturer Part Number:
- 089037007700
It is an authentic OEM sourced item that is specially produced for Ryobi table saws. The blade guard assembly is secured over the blade to protect user from dust and trimmings as well as the blade itself. Always keep the removable blade guard down over the saw blade for through-sawing cuts. This is a complete assembly which includes the clear plastic guard and the metal bracket that secures it to ...
- Manufacturer Part Number:
- 089037006016
This is an authentic replacement part sourced directly from the manufacturer. The handwheel grip is found in table saws from Ridgid. This part is made of high-quality plastic, and is attached to the hand wheel to make it easier to turn. You may require a screwdriver or wrench when replacing this item. This product is provided as an individual replacement part.
- Manufacturer Part Number:
- 089038001073
This is a manufacturer sourced replacement part used on some Ridgid tile saws. This part is made out of rubber. It helps to deliver water to the cutting wheel. It maximizes water efficiency and provides easy maintenance. Note that when installing nozzle, the hole must be pointing towards the saw. One (1) rubber nozzle is included per order.
- Manufacturer Part Number:
- 089290001700
This is an authentic OEM part that has been sourced to be used with table saws from Ridgid. The plastic throat plate attaches to the table in the area around the blade. This item is used to support material at the cut to aid in making clean cuts and limit splintering. This item is available as an individual replacement part.
- Manufacturer Part Number:
- 089025005076
This item has been sourced from the original manufacturer and is intended to be used with table saws from Ridgid. The metal arbor nut fits over the outer blade washer and is used to secure the saw's blade to the arbor shaft. A hex socket wrench is needed to install this item. The arbor nut is sold individually.
- Manufacturer Part Number:
- 089038003010
Genuine Ridgid replacement part, this part is sold individually. This Switch Key is used on the Ridgid tools listed below._b_It must be used in conjunction with the Switch part numbers 826347 & 826123 or the switch will not function. The Switch Key is inserted into the switch, then the switch will be operational. This is safety feature for unauthorized use of the tool.
- Manufacturer Part Number:
- 089290001050
This authentic lock nut is supplied by the original equipment manufacturer for use with Ridgid table saws. It is a special component which helps to secure the handwheel. Over time thread may wear out or the hardware may simply get lost eventually requiring a replacement. Refer to the appropriate diagrams for your model for the exact location and the correct use of this lock nut. It is made of high...
- Manufacturer Part Number:
- 089290001176
The wheel attaches to the lower stand. It is a genuine OEM sourced part which is specially designed for use with Ridgid saws. This item is sold individually and is made of plastic and hard rubber. A wrench may be helpful when replacing this part. It might break over time and will need replacing.
- Manufacturer Part Number:
- 089290001054
This handwheel is an authentic OEM component which is specially designed for use with Ridgid table saws. It provides an identical replacement for a faulty or a missing item that was installed on a new unit. The handwheel is an important part of the mechanism that allows a user to lower and raise the blade. Please refer to the appropriate diagrams of your model for the exact location and the correc...
Ridgid Table Saw Models
-
Ridgid R4513 Table Saw
-
Ridgid R4512 10 Inch Table Saw
-
Ridgid R4092 10" Table Saw
-
Ridgid R4516 Table Saw
-
Ridgid R45171 Table Saw 7-26-18 (Rev:05)
-
Ridgid TS3660 10" Table Top Saw Table Saw
-
Ridgid TS3650 10" Table Saw
-
Ridgid TS24000 10" Table Top Table Saw
-
Ridgid R4517 Table Saw 4-28-18 (Rev:02)
-
Ridgid R4510 Portable Table Saw
-
Ridgid TS2410LS 10" Table Saw
-
Ridgid TS2400 10" Table Saw
-
Ridgid R4520 10-Inch Table Saw
-
Ridgid TS24241 10" Table Saw
-
Ridgid TS24001 10" Table Saw
-
Ridgid R4511 10-Inch Table Saw
-
Ridgid R45101 Table Saw
-
Ridgid TS2400LS 10" Table Saw
-
Ridgid TS24121 10" Table Saw
-
Ridgid TS24240 10" Table Saw