OEM Black and Decker Reciprocating Saw Parts & Accessories

$8.92

Manufacturer Part Number:: 901266

This is a genuine Porter Cable replacement part, it is sold individually. A Cord Strain Reliever is used on most all power tools. It purpose is to reduce the bending of the cord as it comes out of the housing, which otherwise would cause the cord to crack and wear.

Ball Bearing

★★★★★

(1)

$15.42

Manufacturer Part Number:: 605040-15

Genuine OEM sourced replacement part used on a variety of power tools. Ball bearings are used to reduce friction between rotating parts. Bearings experience constant wear when the tool is in operation, because of this they need to be periodically checked and replaced if needed. This part is made out of metal and it is sold individually. Included in part number 381004-00 spindle assembly.

Cord Protector

★★★★★

(8)

$6.15

Manufacturer Part Number:: N918736

This cord protector is a genuine DeWalt replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.

Electric Drill Cord Protector

$7.31

Manufacturer Part Number:: 330005-01

Spring

★★★★★

(6)

$5.37

Minimum Quantity of 2 required

Manufacturer Part Number:: 623343-00

This is a Genuine Manufacturer Sourced replacement part designed for use with Makita Miter Saws. This spring is an important part of the tool-less blade clamp assembly. This Torsion Spring is made out of Metal and it is sold individually. Replacing this item you would need a Screwdriver and Pliers.

CHARGER

★★★★★

(27)

$15.21

Manufacturer Part Number:: 90593304

This is a Genuine Manufacturer Approved replacement part used on some Black and Decker Power Tools. This item is sold individually. Chargers will wear out overtime. Purchasing a charger will be less expensive than buying a new vacuum. Please note that a weak or defective battery can damage the charger. Weak batteries are batteries with bad cells. These type of batteries will not hold a charge. It ...

Power Cord

★★★★★

(75)

$21.28

Manufacturer Part Number:: 330072-98

Length: 8' Gauge: 18 Wires: 2 Type: Bare Wire This cord is a genuine DeWalt replacement part. This cord is compatible with the list of models below. This part is made for double insulated tools It is a two wire cord with two prongs and does not need a ground wire. The cord is sold individually. Installation of this part requires the new cord wires to go correctly into wire terminals also rou...

Carbon Brush With Spring

★★★★★

(10)

$8.35

Manufacturer Part Number:: 450374-12

Genuine OEM replacement This brush is sold individually, 2 are needed for most every electric power tool It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the...

Brush

★★★★★

(3)

$5.74

Manufacturer Part Number:: 384719-01

Genuine Manufacturer Sourced replacement part. This item is made out of Carbon with a Lead Wire attached. This item includes One (1) Carbon Brush per order. It is recommended to replace both Carbon Brushes when replacing one. Please note Brush Holder and Spring are Sold Separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear it...

BRUSH & RETAINER ASY

★★★★★

(1)

$12.38

Manufacturer Part Number:: 874289

Genuine Porter Cable replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of t...

Ball Bearing

★★★★★

(9)

$17.38

Manufacturer Part Number:: 605040-20

This Ball Bearing has metal shielding on both sides. This is a genuine Dewalt replacement part that is sold individually. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. • Bear...

Carbon Brush With Wire Lead An

★★★★★

(5)

$6.15

Manufacturer Part Number:: 387558-01

Genuine DeWalt replacement part. rnIncludes 1 Carbon Brush with wire lead and terminal in rubber sheath attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The re...

Black and Decker Reciprocating Saw Parts

Top Black and Decker Reciprocating Saw Models

Popular Black and Decker Reciprocating Saw Parts

Black and Decker Reciprocating Saw Models

Shop by Popular Black and Decker Reciprocating Saw Part Types

Black and Decker Reciprocating Saw Parts

Search By Model or Part Number

Top Black and Decker Reciprocating Saw Models

Popular Black and Decker Reciprocating Saw Parts

Black and Decker Reciprocating Saw Models

Shop by Popular Black and Decker Reciprocating Saw Part Types