OEM Makita Chop Saw Parts & Accessories

$41.11

Manufacturer Part Number:: 651922-3

This replacement switch is specially made for use on Makita power tools. Switches are a commonly replaced item in power tools. They play a key role by controlling on/off function of a tool. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a screwdriver. • First make sure the tools is not...

Carbon Brush

★★★★★

(5)

$8.68

Manufacturer Part Number:: CB458

Genuine Makita replacement part Set of 2 Carbon Brushes with wire lead attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through...

Starter Assembly

★★★★★

(4)

$88.27

Manufacturer Part Number:: 125919-3

This replacement starter assembly is specially manufactured for Makita handheld cut-off saws. It is a genuine item that is sourced from original equipment producer. This is the starter assembly that allows user to pull-start the engine. This assembly includes a plastic housing, starter pulley, recoil spring, grip and the pull rope. Please note the hardware to secure this part is sold separately. Y...

O-ring 5

★★★★★

(1)

$6.55

Minimum Quantity of 2 required

Manufacturer Part Number:: 213021-5

O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes for O-Ring failure, such as pressure, friction, temperature or chemicals. The most common are: • Extrusion and Nibbling - O-ring has ragged, tattered edges. These are commonly ...

Switch C3d-15ms (terminal Scre

★★★★★

(3)

$63.74

Manufacturer Part Number:: 651131-4

This replacement switch is a genuine item sourced directly from manufacturer. It is an important item that handles on and off function of a unit, allowing user to control the tool. Switches have moving mechanical parts. These parts will eventually break down and fail requiring replacement. Please note the switch is sold individually. Replacing this item is a simple task that should only require a...

Dust Bag

$11.29

Manufacturer Part Number:: 166106-5

This part is supplied directly from the original manufacturer. It is specially designed for use with Makita handheld cut-off saws. The purpose of the dust bag is to collect dust from the unit. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. Keep in mind this high-quality component is made of durable material and is sold individually. Check the owners man...

Ring 15.8

$7.27

Minimum Quantity of 2 required

Manufacturer Part Number:: 257060-5

This ring (15.8) is supplied directly from the original equipment manufacturer. The metal ring is designed to help secure the blade in the various miter saw devices. A screwdriver and a wrench are often necessary for the removal and replacement. The ring is sold individually.

Brush Holder Cap

$6.16

Manufacturer Part Number:: 643700-5

This is a manufacturer sourced replacement part designed for use with Makita power tools. It helps to secure the brush in the housing. This screw-in cap is made of hard plastic and it is sold individually and measures 7-18 HM 1500. To replace it you would need a flat-head screwdriver.

Switch Button

★★★★★

(22)

$6.16

Manufacturer Part Number:: 411478-6

This switch activator button is a genuine Makita replacement part, It is sold individually. It has to be pressed to activate the power switch. This is a very common replacement part. It is advised to order one or two extra to keep on hand. This Makita switch button is compatible with the tools listed below, and it is not guaranteed to fit any other power tool models.

Air Filter

$33.98

Manufacturer Part Number:: 442165-6

This is an authentic manufacturer approved replacement part used on Makita cut-off saws. Its purpose is to filter out dust and debris from contaminating the carburetor. This filter is made out of paper and plastic. It is sold individually. To replace this you would need a screwdriver. • Remove screws securing the cover • Remove cover and replace air filter • Secure the cover back

Carbon Brush Set Cb-203

★★★★★

(7)

$24.37

Manufacturer Part Number:: CB203

Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. This brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can re...

Magnet Sleeve

★★★★★

(1)

$10.03

Manufacturer Part Number:: 688117-5

This part is available as an individual replacement part. The magnet sleeve goes between the stop ring and the wave washer. It is made of plastic and will require replacing if it becomes broken. A screwdriver may be needed when replacing the sleeve. This genuine item is supplied by the original equipment manufacturer for use with Makita sanders, grinders, trimmers, and jigsaws.

Makita Chop Saw Parts

Top Makita Chop Saw Models

Popular Makita Chop Saw Parts

Makita Chop Saw Models

Makita Chop Saw Parts

Search By Model or Part Number

Top Makita Chop Saw Models

Popular Makita Chop Saw Parts

Makita Chop Saw Models