OEM DeWALT Nailer Parts & Accessories

No Mar Contact Pad – Part Number: 179760

$6.16

Manufacturer Part Number:: 179760

Protect finished surfaces while fastening with this no-mar contact pad, designed to fit over the nose of the tool and help prevent dents, scratches, and other marks caused by the contact tip. Made from durable protective material, it acts as a cushion between the tool and the workpiece, helping maintain a clean, professional finish on trim, moulding, and other delicate surfaces. Because no-mar pad...

Bostitch SEAL RING

★★★★★

(2)

$6.19

Minimum Quantity of 2 required

Manufacturer Part Number:: P2320006600

This is a genuine replacement seal ring supplied directly from original equipment manufacturer. It is a commonly used item on Bostitch nailers. This plastic part fits over the piston to provide an air tight seal. Over time seals would deteriorate and crack allowing for air leaks. Please note this item is made out of rubber material and it is sold individually.

ASSEMBLY-PISTON/DRIV – Part Number: 180451

Bostitch ASSEMBLY-PISTON/DRIV

★★★★★

(7)

$22.52

Manufacturer Part Number:: 180451

Genuine Bostitch replacement part, this item is sold individually. The Piston/Driver Assembly is the part of the nail gun that drives the nail into the material that is being used. To help extend the life of a pneumatic tool use the specified oil in it daily 4-5 Drops will do every time you use it. The Piston/Driver Assemblies do have a tendency to bend or break if not used correctly or if you are...

Craftsman WASHER FLAT

★★★★★

(5)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 180449

This is an authentic OEM product which is designed for Bostitch, DeWALT and Porter Cable nailers and staplers. It provides a tight seal for the valve piston. Over time the material may wear down causing air leaks. To replace this flat washer you will need a screwdriver and pliers. This item is sold individually and is made of durable material. Check the diagrams of your model for the proper installation.

Bostitch O RING

★★★★★

(6)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 180448

This is an authentic Bostitch replacement part used on specific Nailers. This is a Rubber Ring and it is sold individually. O-rings are designed to withstand thousands of pounds of pressure by creating a seal between two or more parts.

DeWALT Magazing End Cap

★★★★★

(6)

$6.22

Manufacturer Part Number:: 180201

Keep your nailer or stapler feeding reliably with this magazine end cap, a durable component that secures the end of the magazine while helping to protect the internal pusher and spring assembly. It plays an important role in maintaining proper fastener alignment and helping prevent debris from entering the magazine, supporting smooth and consistent operation. A cracked or damaged end cap can lead...

DeWALT Grommet

★★★★★

(13)

$6.25

Manufacturer Part Number:: 391814-00

This special grommet is an original part which is specially designed for use with DeWALT and Porter Cable staplers and nailers. It is utilized to secure the pin that holds the adjuster. This is a high-quality replacement for a damaged or a missing grommet that was installed on a new unit. To ensure the correct location and application of this part, refer to the appropriate diagrams of your model. ...

Trigger Valve Assembly – Part Number: N566148

DeWALT Trigger Valve Assembly

★★★★★

(60)

$17.35

Manufacturer Part Number:: N566148

This is a Genuine OEM replacement part used on some Dewalt Nailers and Staplers. This item includes a new valve and o-rings. If your tool is leaking air or the trigger valve is stuck, replacing this part may resolve the issue.

Bostitch HEAD VALVE BODY

★★★★★

(147)

$6.16

Manufacturer Part Number:: 180450-S

This head valve body regulates airflow within pneumatic nailers, helping generate the pressure needed to drive fasteners effectively. Built from durable materials, it supports consistent tool performance. Replacing a worn or faulty valve can resolve issues such as air leaks, reduced driving power, or failure to fire, restoring reliable operation.

Bostitch Piston Head Valve

★★★★★

(9)

$9.67

Manufacturer Part Number:: 174054

Restore reliable firing power with this piston head valve, a key component that controls airflow within the nailer's cylinder assembly. By directing air pressure to drive and return the piston during each firing cycle, it helps maintain consistent performance and efficient operation. A worn, cracked, or damaged valve can cause air leaks, reduced driving power, or improper cycling, making replaceme...

Bostitch BUMPER

★★★★★

(1)

$13.93

Manufacturer Part Number:: 180461

This genuine OEM bumper in your nailer absorbs the impact and provides cushioning when the piston retracts after driving a nail. It is seated at the bottom of the nail gun cylinder. Due to the repeated stress it undergoes during operation, the bumper wears out gradually. Signs that suggest the need for bumper replacement include unusual noises, reduced driving power, misfires, or visible damage to...

Bostitch KIT-TRIGGER VALVE

★★★★★

(31)

$50.52

Manufacturer Part Number:: TVA6

This is a genuine Bostitch replacement part that fits all BT brad nailers and all S32 staplers. If trigger leaks air or if tool misfires often, try replacing trigger valve. This kit contains one (1) each of: valve assembly (including both O-rings), lubricant, spring pin punch, and repair instructions. Please note that two (2) O-rings are included but can also be purchased separately as parts # 106...

DeWALT Nailer Parts

Top DeWALT Nailer Models

Popular DeWALT Nailer Parts

DeWALT Nailer Models

Shop by Popular DeWALT Nailer Part Types

DeWALT Nailer Parts

Search By Model or Part Number

Top DeWALT Nailer Models

Popular DeWALT Nailer Parts

DeWALT Nailer Models

Shop by Popular DeWALT Nailer Part Types