Nailer Caps and Lids
Popular Nailer Caps and Lids Parts
- Manufacturer Part Number:
- P0590000200
This is a Genuine OEM sourced replacement part designed for use with Staplers/Nailers. With this Exhaust Cover you can divert the air in any direction you want. It is made out of Plastic and it is Sold Individually. Please note Flange Nut used to secure the Cover is Sold Separately. To replace this item you would need a Hex Key/Allen Wrench.
- Manufacturer Part Number:
- 180201
- Manufacturer Part Number:
- P0590007200
This is a genuine Bostitch replacement part. The Safety Pad is attached to end of the safety to prevent the material that it is being used on from getting marred or dented by the safety arm. It is a advisable to have one or two extra pads on hand as they do have a tendency to crack and deteriorate over time.
- Manufacturer Part Number:
- A01267
This is a high-quality component which is designed for use with Porter Cable nailers and staplers. It is supplied from the original equipment manufacturer. The housing cap is secured in the back of a nailer to ensure a tight seal between the cylinder and the piston. If the cap is damaged or is missing, this part will provide an identical replacement. Make sure to check the diagrams for your specif...
- Manufacturer Part Number:
- 175561
This is a manufacturer sourced replacement part designed for use with Bostitch nailer. This is an end cap to which the hose are connected. This tool uses a 1/4" N.P.T. male plug. This cap is made out of metal and it is sold individually.
- Manufacturer Part Number:
- 854011
The metal compression spring is made of metal and goes between the check pawl and the door. This part is available as an individual replacement and is an OEM replacement part from the manufacturer Bostitch for use in nailers. Springs can lose their tension over time and will need to be replaced. A set of pliers and a socket set may be needed when replacing this spring.
- Manufacturer Part Number:
- A01269
This is an authentic replacement part manufactured for use with Porter Cable brad nailers and staplers. The special housing cap is the end cap that fits on the rear of the body and the cap includes the exhaust deflector. The special housing cap is available as an individual replacement part, please note the mounting hardware is available separately.
- Manufacturer Part Number:
- P0770002400
This is an authentic Bostitch replacement part that has been sourced from the original manufacturer to be used with pneumatic finishing nailers. The safety cover is used to cover and prevent damage to the driver guide assembly. This item is available as an individual replacement part.
- Manufacturer Part Number:
- HY00000377
This is a Makita replacement part directly sourced from the manufacturer for use in nailers. The contact top goes between the contact arm and the nose adapter. A screwdriver may be needed during the replacement of this part. It is made of metal and will require replacing if it becomes broken. This part is available as an individual replacement part.
- Manufacturer Part Number:
- HY00000861