Compressor Valves
Popular Compressor Valves Parts
- Manufacturer Part Number:
- N286039
When you use a compressor the air that is compressed inside the tank will condensate and leave water inside the tank. If it is left in the tank too long it can start to rust out the inside of the tank. The Drain Valve should be opened up and let the water drain out. The water will build up if you have a tendency to leave air in your tank for a long period of time. You should drain your tank afte...
- Manufacturer Part Number:
- N008792
This is a genuine OEM replacement part, it is sold as a individual kit. The purpose of the N008792 Regulator Repair Kit is to repair the regulator on the models shown below. Over time the internal parts of the regulator will become worn and have to be replaced. This is a huge feature on these compressors, inasmuch as on other compressors you have to replace the complete manifold assembly. It als...
- Manufacturer Part Number:
- N017592SV
Genuine Porter Cable replacement part, this item is sold individually. Head Gasket Sold Separately. This part is used in the all of the compressors models listed below. When air is pumped by the piston it passes through the Valve Plate into the compressor tank. There are reeds on the valve plate that will eventually wear out, and the Valve plate will need to be replace. It is advisable at this tim...
- Manufacturer Part Number:
- RE206202AV
This is a genuine Campbell Hausfeld replacement part designed for use with air compressors. It is used to regulate the air pressure in the compressor tank. It is also used to regulate the air pressure of the air exiting the tank. In some instances you will need to lower or higher the air pressure of the tank and the air coming from the tank. It is made out of metal with a plastic knob. This regula...
- Manufacturer Part Number:
- 132BV
This drain valve is an OEM direct from Rolair. Compatible with electric and gas compressors, the metal part is fitted at the base of the tank. This item allows the operator to drain the tank following each extended use. Regularly draining the tank prevents rust and leakage. The drain valve is sold individually. A wrench set may be necessary for the proper removal and installation.
- Manufacturer Part Number:
- SR060513SV
This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, it can lead to internal rust and damage. The drain valve allows you to release this built-up moisture easily. It's especially important to drain your tank after each use—particularly if you tend to le...
- Manufacturer Part Number:
- A19712
This check valve is used to direct air from the cylinder to the tank, and to prevent air from going back into the pump. It is a genuine OEM part used on air compressors. It features threaded fittings to attach it to the tank, pump, and pressure switch. A faulty check valve can cause the pump to restart even with a full tank, that in turn can overload the motor. This brass part is sold individually...
- Manufacturer Part Number:
- E106920
The Husky regulator manifold body is part of a large line of genuine replacement parts. This regulator manifold body is constructed with heavy duty aluminum. It accommodates tank and regulated gauges.
- Manufacturer Part Number:
- N541850
This is an OEM Authorized part designed for Air Compressors. It is a metal Valve which is sold Individually. Check valve lets pressurized air flow into the tank and prevents air from flowing back into the pump. When replacing this part make sure to unplug the air compressor and release the air from the tank.
- Manufacturer Part Number:
- E100971
This is an original Craftsman replacement part manufactured for use with air compressors. The regulator is used to adjust the amount of pressure in the tank. This regulator is sold as an individual replacement part.