Porter Cable Compressor Valves

When you use a compressor the air that is compressed inside the tank will condensate and leave water inside the tank. If it is left in the tank too long it can start to rust out the inside of the tank. The Drain Valve should be opened up and let the water drain out. The water will build up if you have a tendency to leave air in your tank for a long period of time. You should drain your tank afte...

This air compressor regulator repair kit restores proper pressure control and airflow by replacing worn internal components such as seals and the piston. Designed to address leaks or inconsistent pressure, it helps return the regulator to reliable working condition. Replacing damaged parts with this kit can improve performance and ensure consistent operation.

Genuine Porter Cable replacement part, this item is sold individually. Head Gasket Sold Separately. This part is used in the all of the compressors models listed below. When air is pumped by the piston it passes through the Valve Plate into the compressor tank. There are reeds on the valve plate that will eventually wear out, and the Valve plate will need to be replace. It is advisable at this tim...

This replacement valve plate assembly is a high quality item designed for use on Craftsman air compressors. It is a genuine manufacturer sourced item that is used to control the airflow into the cylinder. Once the piston starts traveling up, the reeds on the valve plate open and air is sent into the air tank. Overtime the reeds will get worn eventually requiring valve plate replacement. One metal ...

This check valve is used to direct air from the cylinder to the tank, and to prevent air from going back into the pump. It is a genuine OEM part used on air compressors. It features threaded fittings to attach it to the tank, pump, and pressure switch. A faulty check valve can cause the pump to restart even with a full tank, that in turn can overload the motor. This brass part is sold individually...

This is a genuine OEM approved replacement part designed for use with a variety of air compressors. One quarter turn to fully open/close this drain valve. This part is made out of metal and it is sold individually.

This is an OEM Authorized part designed for Air Compressors. It is a metal Valve which is sold Individually. Check valve lets pressurized air flow into the tank and prevents air from flowing back into the pump. When replacing this part make sure to unplug the air compressor and release the air from the tank.

This is an authentic part that is intended to be used with air compressors from Porter Cable, Black & Decker, and Bostitch. This safety valve attaches to the switch box or the manifold, and is used to release air from the tank if the pressure becomes too high inside the tank. If the safety valve goes off it will need to be replaced, because it can not be reused. The safety valve is sold individually.

This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure is met, the safety valve will open to release the extra air pressure. The amount of pressure required to open the safety valve is set by tension of the spring inside the valve. The spring can wear ou...

This replacement regulator is a high quality item that is supplied from original equipment manufacturer for use with air compressors. It allows user to adjust the pressure of the air coming from the tank to the desired level. Make sure to unplug the air compressor release all the air from the tank before installing this part. Please note one durable metal three port regulator with a plastic knob i...