Band Saw Parts

Pulley Tire

$5.95

Manufacturer Part Number:: 45-96-0050

RUBBER TIRE

★★★★★

(18)

$15.96

Manufacturer Part Number:: N887163

Sleeve Bearing

★★★★★

(8)

$5.95

Manufacturer Part Number:: 42-40-0580

This is a genuine Milwaukee replacement part, it is sold individually. These sleeve bearings are installed on the Blade Pulley Axles on the Milwaukee Bandsaw models shown below. They fit inside of the Blade Pulleys When the blade on the bandsaw is not tracking properly, it may be time to replace them. There are four of these on each tool. This also would be a good time to replace the 45-69-0010 Bl...

Carbon Brush

$5.95

Manufacturer Part Number:: 22-18-0025

This manufacturer sourced replacement part is designed for use with Milwaukee band saws. It includes one (1) carbon brush with lead wire and a spring attached. Carbon brushes are commonly replaced item on power tools Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace bot...

Pulley Tire

★★★★★

(9)

$5.95

Manufacturer Part Number:: 45-69-0030

This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The ti...

Ball Bearing

★★★★★

(3)

$6.35

Manufacturer Part Number:: 605040-65

This Ball Bearing is sealed on both sides. It is a genuine DeWalt replacement part and is sold individually. • Ball bearings are used to reduce friction between rotating parts.. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. • Bearings experien...

Band Saw Table Insert

★★★★★

(14)

$13.20

Manufacturer Part Number:: 426020630001S

This is a table insert plate for your saw. It is attached to the table, and provides access to the blade. A table insert protects the rest of the unit by preventing wood from getting jammed under the blade during cutting. The slit in the insert plate allows for the saw blade to run smoothly. Before installing this part, unplug your saw.

Table Saw Switch

★★★★★

(94)

$45.45

Manufacturer Part Number:: 489105-00

TIRE

★★★★★

(24)

$50.07

Manufacturer Part Number:: JT9-100025A

This genuine replacement tire is designed for JET and Powermatic 14-inch band saws, providing the traction needed to keep the blade centered for smooth, precise cuts. Made from durable rubber or urethane, it fits both upper and lower wheels and helps maintain proper blade tracking and grip. Ideal for restoring performance when original tires become cracked, hardened, or worn, this component ensure...

Rear Roller Kit

★★★★★

(4)

$20.65

Manufacturer Part Number:: 42-28-0025

This rear guide roller kit is an OEM item which is specially designed for Milwaukee band saws. The purpose of this component is to support and guide the blade. It is an identical replacement for a missing or a faulty item that was installed on a new unit. Note, this is the rear guide, the front guide is sold separately. Make sure to refer to the appropriate diagrams of your model for the correct l...

Blade Pulley Tire

★★★★★

(50)

$17.07

Manufacturer Part Number:: 45-69-0010

This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The ti...

Carbon Brush With Spring

★★★★★

(16)

$16.10

Manufacturer Part Number:: 5140011-85

This is an authentic OEM replacement part. Sold individually. Carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Because of this, carbon brushes are one of the most commonly replaced power tool parts. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carb...

Popular Band Saw Brands

Popular Band Saw Parts

Popular Band Saw Models

All Band Saw Brands

Shop by Popular Band Saw Part Types

Band Saw Parts

Search By Model or Part Number

Popular Band Saw Brands

Popular Band Saw Parts

Popular Band Saw Models

All Band Saw Brands

Shop by Popular Band Saw Part Types