Husky Compressor Hoses and Tubes

This outlet tube is an OEM direct from Husky. The aluminum tube is made for use with the C801H, 80 Gal. Stationary Air Compressor. The tube discharges air from the pump to the air compressor tank. A wrench set and thread tape are helpful with the replacement. The outlet tube is sold individually. Please refer to manual and diagrams for safety and repair instructions.

This is a genuine manufacturer approved replacement part designed for use with air compressors. This is the hose that delivers air from the tank. It is made out of rubber and it is sold individually. Please note the hose clamps are sold separately.

Genuine Campbell Hausfeld replacement part, this item is sold individually. The ST033001AV Compression Nut is used to attach the copper tubing to certain components of the compressors listed below. Along with the Compression Nut you will need to use a compression sleeve ( or Ferrule) to seal the tube from leaking air. The Compression Nut will go on the tubing first then the Ferrule will slide into the nut.

It is a genuine replacement part that is supplied by the original manufacturer for use with Campbell Hausfeld air compressors. The discharge tube transfers air between the cylinder and the tank on an air compressor. Over years due to regular wear and vibrations the ends of the outlet tube may begin to crack and leak eventually requiring replacement. It is a complete assembly which includes a durab...

This genuine OEM replacement nipple is designed for use in air compressors, serving as a critical connector between the pressure switch, the tank, and the regulator. A damaged or corroded nipple can lead to air leaks and inconsistent pressure, affecting overall performance. To check for leaks, apply soapy water to the fittings around the pressure switch and watch for bubbles. If replacement is nec...

This is a genuine OEM replacement part used with many air compressors machines. the exhaust tube is constructed of metal, and secures the tank to the cylinder head. This item helps with releasing the pressure overflow from the tank. An adjustable wrench is needed for the repair. This item is sold individually.

This tube fitting provides a secure connection point for tubing, helping ensure reliable flow and leak-free operation. It is commonly replaced when fittings loosen, crack, or show signs of wear.