1. Removed the old drive bearing and replaced.
2. Removed the motor housing, the armature and replaced the inner armature bearing.
3. Installed the new flat shoe.
Installed new bearing inside front belt sander roller. Used an appropriate sized socket to gently tap the bearing in place. At this point the roller/bearing assembly was bolted to the front of the machine as required. Then installed the new sanding belt, job complete.
Did you find this story helpful?
Thank you for voting!
rubber on pulley desingrated. unit is over 20 years old
Had to order new pulley, new bearing plus all washers.
Had to use vise as a press plus 2 sockets to make this work. One socket on each end , one for the bolt to be pressed into which allows the bearing to be fully seated and the other end a small socket to drive the bearing into the new pulley.
Helps to be mechanically mind
... Read moreed.
Not sure why they don\'t have this pulley assembly already assembled so all a customer would have to do is bolt it on to the sander. Would save a lot of time and effort.
Thanks for having the new parts available.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10141681
Manufacturer Part Number: 212104-8
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
__WW_1.gif "Part Location Diagram of 212104-8 Makita Needle Bearing 1212")
__WW_1.gif "Part Location Diagram of 212104-8 Makita Needle Bearing 1212")
