Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
10463899-1-M-Powermatic-BB-6206ZZ-Ball Bearing
Part Location Diagram of BB-6206ZZ Powermatic Ball Bearing
See part E-5 in the diagram
( Grid squares measure 1x1 inch )
10463899-1-S-Powermatic-BB-6206ZZ-Ball Bearing 10463899-2-S-Powermatic-BB-6206ZZ-Ball Bearing Part Location Diagram of BB-6206ZZ Powermatic Ball Bearing

Ball Bearing BB-6206ZZ

Manufactured by:
Powermatic
ERP Number:
ERP10463899
Part Number:
BB-6206ZZ
Original Equipment Manufacturer ?
  Works with your model  JTM-4VS!
$53.24
On Order

Difficult 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   JTM-4VS!

Jump to:

Description Troubleshooting Repair Instructions Model Cross Reference

Product Description

?

This is an original replacement part manufactured for use with power tools. The ball bearing is used with a variety of different types of equipment and is commonly used to reduce friction between a rotating shaft and a fixed housing. This ball bearing is available as an individual replacement part, please see model diagram for part location and usage.

Troubleshooting

This part works with the following brands:
  • Jet
  • Powermatic
This part works with the following products:
  • Planer Jointer
  • Band Saw
  • Bench Grinder

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bearing and start switch

john from spokane valley, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
Parts Used:
JT9-JBG10A-66, BB-6206ZZ
First make a mark on the motor and the motor cover so you can line up the screw holes when you put the motor cover back on. Remove the four screws then use a mallet to hit the motor cover off. Pull the bearing out of housing, then install the new bearing. Next make a mark on the shaft where the start switch is located. Note how the start switch is assembled. Remove the old switch and install the new one. Use a rubber hammer to put motor cover back on, put the four screws back in.
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10463899
Manufacturer Part Number: BB-6206ZZ
Brand Model Number Description
Powermatic 1285 Planer Jointer - 12-inch Jointer
Powermatic 2013 Band Saw - 2HP 1Ph 230V Bandsaw
Powermatic 209-1 Planer Jointer - 5HP-1Ph 230V Planer
Powermatic 209-3 Planer Jointer - 5HP-3Ph 230V/460V Planer
Powermatic 209HH-1 Planer Jointer - 5HP-1Ph 230V Planer
Powermatic 209HH-3 Planer Jointer - 5HP-3Ph 230V/460V Planer
Powermatic 2415 Band Saw - 5HP 3Ph 230/460V Bandsaw
Jet JBG-10A Bench Grinder - Bench Grinder
Jet JBG-6A Bench Grinder - 6" Shop Bench Grinder
Jet JDP-20MF Drill Press - Drill Press
Jet JHS-2200 Hand Truck & Dolly - Hydraulic Stackers
Jet JOVS-10 Sander Polisher - Oscillating Spindle Sander
Jet JSB-10H Bench Grinder - 3450 RPM Buffing Machine
Jet JSB-10L Bench Grinder - 1725 RPM Buffing Machine
Jet JTM-4VS Mill - Variable Speed Turret Mill
Jet JWBS-20QT-3 Band Saw - 18-inch Band Saw
Jet JWBS-20QT-5 Band Saw - 18-inch Band Saw
Jet JWP-208-1 Planer Jointer - 3HP - 1Ph 230V Planer
Jet JWP-208-3 Planer Jointer - 5HP - 3Ph 230/460V Planer
Powermatic PJ1696 Planer Jointer - 16-inch Jointer
Ball Bearing
$ 53.24
On Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖