This is an original DeWalt replacement part manufactured for use with planers. This metal key mounts in the slot at the end of the cutter head shaft, and aligns with the groove cut out in the center of the pulley. This key is sold individually, please see model diagram for additional parts.
Remove the top shroud. Remove the cutter deck from the base to access the end of the cutter barrel from behind the height adjustment screw.
Install the new key, pulley and nut, putting a thread locking agent on the cutter barrel threads to hopefully prevent the nut coming adrift again.
Reassemble planer after polishing an
... Read mored waxing the alignment rods at the four corners of the machine.
Took side off planer(Allen wrench and screwdriver)
Put pulley back on with new key and nut to hold in place
Tightened nut and put belt back on
Replaced side and tightened back up
Started up and ran great
Did you find this story helpful?
Thank you for voting!
Replace pulley and woodruff key that was damaged when wood stuck in planer
Pulled side cover and bottom cover to expose chain drive and gears. Pulled adjustment shaft and then pulley and key. replace both. Reassemble and ran planer to check accuracy.
Changed the pulley wheel and the key - stretched the new belt onto the wheel (about half-way and then spun the wheel with a socket wrench)
Did you find this story helpful?
Thank you for voting!
Plsner was very loud and sounded like it was ready fly apart. After disassembly, found pulley was worn in its bore and key way worn also. Shaft appeared to be in good shape.
Dissassembled planer to find what the problem was. Removed old belt, pulley and key.
Ordered new parts to replace damaged parts.
New parts arrived in a week as promised.
Installed new parts. Had to stretch belt during installation as it was quite tight. Then reassembled the planer. It ran smoothly, and worked as n
... Read moreormal on testing.
Thank you ereplacementparts!
Bob
Read less
Did you find this story helpful?
Thank you for voting!
Belt on planer was broken which in turn damaged the drive pulley also replaced the cutter blades as they were very dull.
took bolts and screws out and replaced the new parts
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
