Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
10321643-1-M-Delta-22-549-Knives / 22-580
Part Location Diagram of 22-549 Delta Knives / 22-580
See part 900 in the diagram
( Grid squares measure 1x1 inch )
10321643-1-S-Delta-22-549-Knives / 22-580 Part Location Diagram of 22-549 Delta Knives / 22-580

Knives / 22-580 22-549

Manufactured by:
Delta
ERP Number:
ERP10321643
Part Number:
22-549
Original Equipment Manufacturer ?
$89.05
On Order

Easy 

15 - 30 mins 

(6 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is a set of two high quality steel planer blades that are designed for use with Delta planers. Planer's knives are machined to make very precise cuts, when the knife blades wear down you won't get the level of precision you require. This genuine part is supplied directly from original equipment manufacturer.

Troubleshooting

This part works with the following brands:
  • Delta
This part works with the following products:
  • Planer Jointer

Questions & Answers

?

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
My delta planer no longer feeds the wood through and it sounds like a stripped gear ? What do i need
James - March 11, 2023

Hi James, Thank you for your question. If your planer is not feeding the wood, there are some parts that you will need to check to see which one is causing the issue. We recommend checking the drive belt, the infeed and outfeed rollers, the planer knives and the key. If you suspect the gears, you will need to check them to. Once you have determined the part you need, please call customer service. We look forward to hearing from you!

eReplacementParts Team
March 11, 2023

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Planer knives got dull & needed replacing

Sandy from Branson, Missouri

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
22-549
Loosened screws to cover of exiting material. Unscrewed and removed the 8 blade holding screws. Removed old blade, reversed it if the other side had not been used, which is the case here. Re-attached the screws. All is well. What I can\'t figure out is how to re-attach the material deflector which has vibrated loose just above the cu tter head rotator. The bulkhead above the wood entrance to be planed is blocking access to re-attaching the debris deflector. If any one can give me directions or provide me the path to get the instructions as to how to do this, please send me an e-mail to [email protected] .
Read less
Did you find this story helpful?
Thank you for voting!

planer knives were dull

Leroy from Helena, Montana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
22-549
Using the wrench provided with the planer and following the manufacturer\'s instructions the old knives were removed and new ones installed.
The original part number of the knife set was obsolete but was able to locate a replacement part number for this model of planer.
Did you find this story helpful?
Thank you for voting!

The tip of the wrench to remove the 14 screws snapped off with the first screw

Jack from Torrance, California

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Parts Used:
22-549
I brought out my 20v impact driver, and found the correct screw tip. the screws backed out instantly....
Installed the new planer knives
I re-used the old screws because the heads were all in good shape.
Did you find this story helpful?
Thank you for voting!

Blades were dull and chiped

Gary from Bullhead City , Arizona

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
22-549
Replaced blades with new ones and it went very smoothly the screws are very tight so you really have to crank down on em to break free but other than that went great but watch the springs they will fly if not careful
Did you find this story helpful?
Thank you for voting!

Dull blades

mike from pasadena, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
22-549
Removed the old blades and inserted the new ones.
Did you find this story helpful?
Thank you for voting!

Blades were dull

William from Chandler, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
22-549
Followed the instructions that are printed on the back of the package. Easy
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10321643
Manufacturer Part Number: 22-549
Brand Model Number Description
Delta 22-555 Planer Jointer - 13" Portable Thickness Planer
Delta 22-580 Planer Jointer - Planer
Knives / 22-580
$ 89.05
On Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖