Removed the screws from the clamping jaws. Then removed the screws from the stop. Replace the blade holders and blades. Installed the rest of the parts back on. Making sure the blades were locked in and in place.The ordered parts arrived as scheduled, they were what I ordered, and I am very pleased with your service.
Did you find this story helpful?
Thank you for voting!
Hidden embedded nail in wood damage cutting blades, blade holders and clamping jaws.
1. Loosen the two torx screws for one of two blade holder
2. Remove blade.
3. Remove the two torx screws for the blade holder.
4. Remove blade holder which exposes the two torx screws that hold the clamping jaws. Be careful not to lose the spring washers.
5. Remove clamping jaw assembly that contains two part
... Read mores, the clamping jaw and the clamping jaw holder.
6. Reassemble by following the reverse of disassembly steps. Cutting blade has a groove that locks to the blade clamp for a fixed height.
7. When the cutter head is reassembled and if needed disassemble the other cutter head.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19509844
Manufacturer Part Number: 2609110107
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
