Part Location Diagram of 47485 Wagner Spring, Outlet
See part A-13 in the diagram
( Grid squares measure 1x1 inch )

Spring, Outlet 47485

Manufactured by:
Wagner
ERP Number:
ERP18199844
Part Number:
47485
Original Equipment Manufacturer ?
$7.06
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine OEM sourced part which is specially designed for use with SprayTECH and Wagner sprayers. It is an identical replacement for a missing or a faulty outlet spring that was installed on a new unit. The part is utilized to apply tension on the ball that sits in the valve seat. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Wagner
  • SprayTECH
  • Titan
This part works with the following products:
  • Paint Sprayer
  • Sprayer
Part# 47485 replaces these:
0047485,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Pump was bad and prime valve wore out

Kenneth from ORANGEVALE, California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench (Adjustable)
Parts Used:
270951, 270526, 47485
1- removed pump with wrench and replaced with new one.
2- Had to figure out how to get the old prime valve assembly off. Ended up cutting the direction knob off as mine did not have set screws. It had pressed washers that were impossible to remove.
3-Followed instructions for replacing the new assembly.
Did you find this story helpful?
Thank you for voting!

Would not prime

Henry from OLIVEHURST, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
89494, 93635, 89482, 47485
Removed and replace the outlet seal and the outlet check ball and spring. Very easy repair.
Also, be sure to remove the front oil cover and check for damaged hyd. pickup tubes, I had a damaged tube that prevented pressure control and priming
Did you find this story helpful?
Thank you for voting!

Parts worn out or missing

Robert from SAN BRUNO, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
89494, 93635, 47485
I installed the new parts to repair airless sprayer.


Did you find this story helpful?
Thank you for voting!

Wagner airless painter needed tune up

David from Walstonburg, North Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set, Wrench (Adjustable)
Parts Used:
89694, 89494, 93635, 47485, 9970103
Removed old parts/cleaned and replaced with new parts.
Did you find this story helpful?
Thank you for voting!
  • 1