( Grid squares measure 1x1 inch )

Seal LB0765

Manufactured by:: Senco
ERP Number:: ERP10074477
Part Number:: LB0765

Works with your model LS118GA!

$7.20

Delivers in 3-5 Business Days!

Minimum Quantity of 2 required

Easy

1- 2 hours

(3 rated repairs) ?

Works with your model LS118GA!

Jump to:

Description Troubleshooting Repair Instructions Model Cross Reference

Product Description

An authentic OEM sourced replacement part that is specially designed for Senco staplers. It is used to create an air-tight seal for the firing valve stem, please make sure to check appropriate diagrams of your unit for correct location and use of this item. It is a high-quality component which is made of durable rubber material and it is sold individually.

Troubleshooting

This part works with the following brands:

Senco

This part works with the following products:

Nailer

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

1- 2 hours

(3 rated repairs) ?

< Prev
1
Next >

Sort by:

Just had to replace a broken part

Dale from Jarrettsville, Maryland

3 of 3 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Wrench set
Parts Used:: LB5013, LB5012, LB0765, LB0326, LB0118, LB0116, LB0031, LB0018, LB0016, LB0015, BA0091

I decided to clean out and replace the seals in the gun. Cleaned all the internal moving parts , replaced all the o-rings and the valve assembly, put it all back together and It works fine now.
Lay out all the new parts and as you remove the one old one replace it with the new one.

Did you find this story helpful?

Air leak

Norman from CLOVIS, California

0 of 1 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Nutdriver, Pliers, Screw drivers
Parts Used:: LB5013, LB5012, LB0765, LB0326, LB0118, LB0116, LB0031, LB0018, LB0016

Unscrewed staple gun, pulled it apart, replaced all seals.

Did you find this story helpful?

Leaking air out the top would not shot no staples

David from Pottsville, Pennsylvania

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: LB0765, LB0118, LB0116, LB0018, LB0016

Took the 4 Allen screws out removed top pull piece out of cylinder replaced all the seals push it back in reinstalled top and Screws and presto fixed works like new.

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP10074477
Manufacturer Part Number: LB0765

Brand	Model Number	Description
Senco	(J1/2)-(060004N)	Nailer - Senco (J 1/2)-(060004n) Parts
Senco	(J51/2)-(060012N)	Nailer - Senco (J5 1/2)-(060012n ) Parts
Senco	(JG1/2)-(060006N)	Nailer - Senco (Jg 1/2)-(060006n) Parts
Senco	(JG455/8)-(060014N)	Nailer - Senco (Jg45 5/8)-(060014n ) Parts
Senco	(JG5/8)-(060008N)	Nailer - Senco (Jg 5/8)-(060008n) Parts
Senco	(JN1/2)-(060002N)	Nailer - Senco (Jn 1/2)-(060002n) Parts
Senco	(JN23305/8)-(060009N)	Nailer - Senco (Jn2330 5/8) -(060009n ) Parts
Senco	(JN51/2)-(060010N)	Nailer - Senco (Jn5 1/2)-(060010n ) Parts
Senco	(JN55/8)-(060067N)	Nailer - Senco (Jn5 5/8)-(060067n ) Parts
Senco	060002N	Nailer - Stapler
Senco	060004N	Nailer - Stapler
Senco	060006N	Nailer - Stapler
Senco	060009N	Nailer - Stapler
Senco	060010N	Nailer - Stapler
Senco	060012N	Nailer - Stapler
Senco	060014N	Nailer - Stapler
Senco	060067N	Nailer - Stapler
Senco	J	Nailer - 060004N ( 1/2) Stapler
Senco	K	Nailer - (G4450-1) Stapler
Senco	KN4450-1	Nailer - Senco K-(Kn4450-1 1-4) Parts
Senco	L	Nailer - (G4450-1) Staper
Senco	LN4450-1	Nailer - Air Nailer
Senco	LS	Nailer - Stapler
Senco	LS1	Electric Drill - 18 Ga. Headless Pinner
Senco	LS118Ga	Nailer - Ls1 Headless Pinner
Senco	LS2	Nailer - Stapler
Senco	LS4	Nailer - Stapler
Senco	LS5	Nailer - Stapler